Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Composed of an electronic module and flexible sensor, which permits measurements on conductors where standard clamp-on probes cannot be used. The flexibility makes it easy for the sensor to be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors.
Features
Applications
| Electrical Specifications | |
| Measurement Range | 5 to 300A |
| Output Signal | 100mV/A & 10mV/A |
| Accuracy | 1% of Reading |
| Crest Factor | 3 |
| Phase Shift @ 50/60Hz | 1.3° |
| Frequency Range | 10 to 20,000Hz (intentionally limited for optimum performance) |
| Residual Noise | 500mA |
| Working Voltage | 1000Vrms max. |
| Influence of Frequency | Add 1% to the reference |
| Influence of Adjacent Conductor | <2% |
| Influence of Conductor Position in Jaw | <4% |
| Mechanical Specifications | |
| Output | Two 4mm safety banana jacks, standard 3/4" (19mm) spacing |
| Battery | 9V Alkaline |
| Low Battery | Green LED Off when battery reaches 7V |
| Overload Indication | Red LED indicates input greater than selected range |
| Battery Life | 150 hours typical (continuous use) |
| Sensor Dimensions | 24" |
| Electronic Module Dimensions | 4.9 x 2.5 x 1.1" (124 x 64 x 28mm) |
| Cable Length | 6.5ft (2m) |
| Drop Test | 1.0m on 38mm of oak or concreteTest according to IEC1010 |
| Vibration | Test per IEC 68-2-6Frequency Range: 10Hz to 55HzAmplitude: 0.15mm |
| Mechanical Shock | 100G, Test per IEC 68-2-32 |
| Environmental Specification | |
| Case Protection | Sensor: IP65 per IEC529; Electronic Module: IP40 |
| Operating Temperature | 14 to 131°F (-10 to 55°C) |
| Storage Temperature | -40 to 158°F (40 to 70°C) |
| Influence of Temperature | Sensor: -10°C to 100°C: <0.5% per 10°C Module: -10°C to 55°C: <0.5% per 10°C |
| Operative Relative Humidity | 10 to 30°C 85 ±5% RH without condensation40 to 50°C 45 ±5% RH (without condensation) |
| Altitude | Operating: 0 to 2000m; non-operating: 0 to 12000m |
| Safety Reference Specifications | |
| Safety Ratings | EN 61010, 1000V, Cat. III, Pollution Degree 2 |
| Agency Approvals | CE Mark |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.