US Dollar
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Availability: 1 in Stock
Fieldpiece SC680 OffersFieldpiece SC680 Wireless AC DC Power Clamp Meter for HVAC/R Direct integration with Job Link System App The Fieldpiece SC680 is a top of the line TRMS Wireless Power Clamp Meter packed with all the essential features service technician need to install, service, and troubleshoot any HVAC/R system The SC680 meter also includes direct integration with the Job Link System App. The SC680 Fieldpiece is ideal for obtaining electrical measurements on mini splits and includes Molex tips for hard-to-read circuitry. The low pass filter removes noise to get true voltage readings on variable frequency drives (VFDs) as well as tests three-phase power lines with two leads, and maintains wireless connection directly to a mobile device at 1000 feet (305 meters). The clamp meter has a safety rating of CAT IV at 600 V and CAT III for 1000V. The Fieldpiece SC680 Wireless Power Clamp Meter is great for troubleshooting mini-split systems. It includes dual Type K temperature ports to measure entering/exiting air temperatures as well as measure frequency (Hz) directly with the clamp jaw. The included Molex tips are super thin to get readings on hard to reach circuitry to measure voltage and resistance. In addition, the SC680 measures DC Amps and Diode for mini-split inverts with a swivel clamp to view readings at any angle. The Fieldpiece SC680 is the essential clamp meter with wireless functionality for HVAC/R professionals. The clamp meter will help determine system efficiency by directly measuring power consumption (kW) of a system. A technician can then recommend cost saving actions to a customer once the information has been documented. You can take more accurate VAC and AAC readings on variable frequency drives with the True RMS sensing technology and measure the starting amp draw of a compressor with Inrush current mode. One of the most failure prone components in an HVAC/R system is the capacitor. The capacitance test allows a service technician to test questionable motor start and run capacitors to determine when a capacitor needs to be replaced. Hang your SC680 clamp meter to any metallic surface with the heavy-duty magnet and when the job is done the test leads are easily stored by twisting them around the clamp and snapping the probes in the back for convenient and tidy storage. You also have the ability to take measurements more safely with one hand using the single test lead holder. The SC680 600 AC DC swivel clamp meter provides additional lighting with its powerful LED built into the clamp jaw, a bright blue backlight on the display to easily see your measurements as well as a dial backlight to clearly view the dial in low light situations. The big dual backlit display makes it easy to see both voltage and amperage readings at the same time. One of the safety features on the Fieldpiece meter SC680 is the high voltage warning which includes a warning symbol on the display, an audible beep, and a red LED that lights up. A service technician can connect directly with the Job Link app to document all electrical measurements. The Fieldpiece multimeter SC680 can also be paired with the SM380V or SM480V manifolds, SRS3 wireless scale, and other Job Link Probes and accessory heads to receive and document a complete system snapshot in the app. What is
Features
The Fieldpiece SC680 Wireless Power Clamp Meter is great for troubleshooting mini-split systems. It includes dual Type K temperature ports to measure entering/exiting air temperatures as well as measure frequency (Hz) directly with the clamp jaw. The included Molex tips are super thin to get readings on hard to reach circuitry to measure voltage and resistance. In addition, the SC680 measures DC Amps and Diode for mini-split inverts with a swivel clamp to view readings at any angle.
The Fieldpiece SC680 is the essential clamp meter with wireless functionality for HVAC professionals. The clamp meter will help determine system efficiency by directly measuring power consumption (kW) of a system. A technician can then recommend cost saving actions to a customer once the information has been documented.
You can take more accurate VAC and AAC readings on variable frequency drives with the True RMS sensing technology and measure the starting amp draw of a compressor with Inrush current mode. One of the most failure prone components in an HVACR system is the capacitor. The capacitance test allows a service technician to test questionable motor start and run capacitors to determine when a capacitor needs to be replaced.
Hang your SC680 clamp meter to any metallic surface with the heavy-duty magnet and when the job is done the test leads are easily stored by twisting them around the clamp and snapping the probes in the back for convenient and tidy storage. You also have the ability to take measurements more safely with one hand using the single test lead holder.
The SC680 600 AC DC swivel clamp meter provides additional lighting with its powerful LED built into the clamp jaw, a bright blue backlight on the display to easily see your measurements as well as a dial backlight to clearly view the dial in low light situations. The big dual backlit display makes it easy to see both voltage and amperage readings at the same time.
One of the safety features on the Fieldpiece meter SC680 is the high voltage warning which includes a warning symbol on the display, an audible beep, and a red LED that lights up.
A service technician can connect directly with the Job Link app to document all electrical measurements. The Fieldpiece multimeter SC680 can also be paired with the SM380V or SM480V manifolds, SRS3 wireless scale, and other Job Link Probes and accessory heads to receive and document a complete system snapshot in the app.
Applications
| Display | 10000 count dual display |
| Backlight | 5 minute duration with auto-off, blue color |
| Overrange | “OL” or “-OL” is displayed |
| Measurement rate | 3.3 times per second, nominal |
| Zero | Automatic |
| Operating environment | 32 to 122°F (0 to 50°C) at <70%RH |
| Storage temperature | -4 to 140°F (-20 to 60°C), 0 to 80%RH (with battery removed) |
| Accuracy | Stated accuracy at 73°F ±9°F (23°C ±5°C), <75%RH |
| Temperature coefficient | 0.1 x (specified accuracy) per °C: 0 to 19°C (32 to 66°F), 28 to 50°C (82 to 122°F) |
| APO (Auto Power Off) | Approx. 30 minutes |
| Power | Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| Battery life | 100 hours typical alkaline (No wireless, no backlight) |
| Low battery indication | Battery icon blinks and “batt” is displayed when the battery voltage drops below the operating level |
| Altitude | Up to 6562 ft (2000 m) |
| Overload protection | 1000VDC or 750VAC rms unless otherwise stated |
| Test leads | Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above. Included test leads are gold-plated and have removable safety caps. |
| Dimensions | 11.87 x 3.13 x 1.97" (301.5 x 79.5 x 50.0 mm) |
| Weight | Approx. 480 g including battery |
Everything you need to know about orders, cancellations, refunds, and delivery.
EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.
When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.
Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.
For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.
For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.
Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:
Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.
Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.
You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.
The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.
To exercise your cancellation right, notify us with a clear written statement by:
The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.
A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.
If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.
Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.
To be eligible for a return, all of the following conditions must be met:
We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.
The following items are not eligible for return under any circumstances:
You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.
You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:
We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.
If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.
If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.
Reach out to our support team for assistance with any order or return.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
