Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Availability: 2 to 3 Weeks
Hobbes 256852 OffersGIGATEST is a wire-speed Ethernet Tester that features on-site cabling analysis of network infrastructures.
Network cabling of new structures is generally performed by third-party contractors that often perform network cable testing to ensure connectivity. However, it is frequent network throughput is neglected and only to be discovered the cables installed are unable to reach wire-speed transmission or receive multiple error packets. A large part of establishments functioning smoothly is rooted in the performance of the network. GIGATEST is the ideal solution for testing and troubleshooting potential problems of data transmission and bandwidth.
GIGATEST function in pairs with the assignment of "Lord and Servant" intended to achieve singlehanded testing. The units automatically negotiate to establish bi-directional symmetric/asymmetric wire-speed transmission (loop test) and synchronize test results. When installing an asymmetric transmission network, in which the downstream is greatly faster than upstream speed, it is difficult to test the network using the general loopback method. Since data transmission speeds of both sides must match, GIGATEST asymmetric loop test is capable of adjusting the speed to verify symmetric transmission quality.
Utilizing GIGATEST during network cabling set-up will ensure networks can optimally perform to minimizing interruptions, eliminate downtime, and capable of supporting future needs of your operation.
Features
Applications
| Supported frame format | Ethernet II frame IEEE 802.3 frame |
| Side | Left: One 10/100/1000 Mbps UTP Ethernet port on–panel operationRight: One USB port (mini–USB connector)-One power switchBottom: One set of 16 scales rotary switch for different function modes-Two sets of 16 scales rotary switch for ID control-Two sets of 16 scales rotary switch in second for control of test duration-One clear counter button-One broadcast test packet button-One Run/Stop test button |
| Auto Negotiation/Forced Mode | 10/100Mbps Half/Full Duplex1000Mbps Full Duplex |
| Transfer rate | Wirespeed by test button on the device-Customized in Mbps via configuration of utility software-Asymmetric transfer rate by a pair of GIGATEST for ADSL test viaconfiguration of utility software |
| Packet length | Short packet length 64 bytes by test button on the device-Long packet length 1518 bytes by test button on the device-Random packet length 64/128/256/512/768/1024/1518 bytes bytest button-Specify fix length 64/128/256/512/768/1024/1518 bytes viaconfiguration of utility software |
| Payload in frame | Random by default button-Selectable fix pattern, Byte increase, random or BERT via configurationof utility software |
| Time based test | 0~255 seconds by rotary switch on the device or 00 on two rotary switchesfor infinite time till stop button is pressed-Input test time required via configuration of utility software |
| Packet based test | Customized by packets counts via configuration of utility software-Generate specified VLAN ID tagged packet-Generate specified Destination IP/Source IP packetUser–defined loss tolerance to identify Pass/Fail result of Loopback testNo packet loss to identify Pass/Fail result of general testPass or Fail LED indicator and log to show the result of testBi–directional Symmetric Loop Test from utility softwareBi–directional Asymmetric Loop Test from utility softwarePacket Generation Test from utility softwareUser–defined test modes from A~E scales rotary switch.Test mode A~E can be changed randomlyProvide pre–defined template A: P2P test, B: Packet Generation,C: Web Access, D: Loopback Test, E: ADSL 10M/20M for fast configurationDefault function and test modes from 0~9 scales rotary switch as below |
| 0, Servant mode | Switch to Servant mode and accepts control from Lord |
| 1, Short Packet | Symmetrical and bi–directional short packets (64 bytes length) test with test result |
| 2, Long Packet | Same test as function 1 with long packets (1518 bytes length) |
| 3, Random Packet | Same test as function 1 with random (64~1518 byteslength) packets |
| 4, BERT Loopback | Lord send BERT pattern to Servant for Loopback test by swapping DA and SA |
| 5, Mesh Loop | Lord sends test packets to the 1st Servant, then the 1stServant forward packets to 2nd Servant. It is repeated until packets return to Lord |
| 6, Web Access | Get IP from DHCP and download a specified file from Internet |
| 7, Broadcast packet | Send 60 broadcast frames per second in increased frame length |
| 8, Loopback (layer1) | Switch to layer 1 loopback mode (as servant) |
| 9, Loopback (layer2) | Same as function 8 with swapped DA and SA and recalculated CRC |
| A~E, Customized settings | Customized settings configured by PC such as ADSL network test |
| F, PC control | Control by PC via USB port |
| Power/Run | Power and Test Running status |
| Speed | Connection Speed, different blinking frequency shows differentspeeds, able to identify 10Mbps, 100Mbps and 1000Mbps |
| Low Bat | Low battery warning |
| Get_IP | Status for getting IP from DHCP |
| TX | Data Transmission (fast blinking indicates Wirespeed)Loss: Packet loss at transmission side |
| RX | Data Receiving (fast blinking indicates Wirespeed)Loss: Packet loss at receiving side |
| Pass | Passed test result |
| Loopback | Loopback test in servant mode |
| Servant | Under Servant state |
| Connect | Connection status with other GIGATEST |
| CRC | Error CRC packet received |
| Fail | Failed test result |
| Tx Packet, Rx Packet, CRC Error Packet | Tx Bytes, Rx Bytes, Tx Rate, Rx Rate, Rx Broadcast Packet, Rx Multicast Packet, Rx Unicast Packet, Rx Pause Packet, Rx VLAN Packet, Rx IPv4 Packet,Rx Dribble Packet, Rx Alignment Error Packet, Rx Under Size Packet, Rx Over Size Packet, Rx 64Bytes Packet, Rx 65–127 Bytes Packet, Rx 128–255 Bytes Packet, Rx 256–511 Bytes Packet, Rx 512–1023 Bytes Packet, Rx 1024–1522 Bytes Packet |
| GIGATEST | GIGATEST 1.0 is a GUI (graphic user interface) applicationsoftware for GIGATEST, which is for controlling, configuration, countersdata collecting and system upgrade of this machine |
| Temperature | Operating: 0 to 40°C (32 to 104°F)Storage: 0 to 50°C (32 to 122°F) |
| Humidity | Operating: 0 to 85% RHStorage: 0 to 85% RH |
| Power and Connection | Two built–in 3.7V NI–MH batteriesFrom USB cable via PC or external adapter |
| Dimensions | 141 x 22 x 22 mm |
Everything you need to know about orders, cancellations, refunds, and delivery.
EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.
When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.
Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.
For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.
For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.
Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:
Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.
Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.
You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.
The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.
To exercise your cancellation right, notify us with a clear written statement by:
The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.
A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.
If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.
Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.
To be eligible for a return, all of the following conditions must be met:
We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.
The following items are not eligible for return under any circumstances:
You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.
You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:
We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.
If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.
If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.
Reach out to our support team for assistance with any order or return.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
