Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
This has high standards of sensor quality and reliability.
Features
To optimize safety, compliance and productivity, use the Solo with IntelliDoX docking stations and the Honeywell SafetySuite Device Configurator software.
IntelliDoX: automated testing, configuration and recordkeeping
Simply place the detector in the dock and it automatically transfers the test results and performs the actions you choose. You can do a bump test, change set points, enable calibration and/or bump reminders, update firmware and more. Fleet management software transfers the alarms, peak readings and other data to your computer via Ethernet or USB.
Want to bump one detector? Reconfigure another? Each dock in the group has its own crisp, easy-to-read LCD screen, keypad and pump for independent operation, while sharing power and calibration gas.
Device configurator: centralized compliance monitoring
With this Windows-based software, you can view and export detector data, configure alarm set points, deploy firmware updates and more. So you can improve safety, compliance and productivity.
Use a mobile app for setup, configuration and verifying test data
When you pair the detector with a smartphone, you can use the Device Configurator app to set up the detector, choose alarm set points and more - all from up to 6 meters away using Bluetooth Low Energy (BLE). Want to check bump and calibration data? Use the app to see the readings from the calibration - along with who performed it, when and with what gas - and email a certificate to stakeholders (this needs to be verified as available at launch). Also use the app to upgrade firmware in a snap.
Connect to desktop software without a docking station
Dont have IntelliDoX docking stations? With the wireless version of the detector, use BLE to share the detectors gas data with the desktop software - no dock required. Its a simple way to manage your fleet.
Monitor worker safety from anywhere
With the Safety Communicator mobile app, there is no need to wait for a detector to be docked before seeing vital data. Instead, pair it with your smartphone, and the app instantly sends gas readings and other data to the real-time monitoring software. Access it from any device with an internet connection - and get remote visibility on worker safety and location.
One-button operation
The detector is easy to operate - even if youre wearing gloves. Using this button or the Honeywell SafetySuite Device Configurator software, you can easily configure set points, latching alarms and other parameters. Also access measurements for short-term exposure limit (STEL), time-weighted average (TWA) and the highest concentration of gas detected in the past 24 hours.
Safety at a glance
Want to quickly determine whether a detector is in compliance? Just activate IntelliFlash. This flashing green light - visible from a distance - means the detector has been bump tested and is monitoring correctly. Want to see when the detector is not in compliance? Activate the noncompliance flash, which blinks red when the detector needs a bump test, has detected a gas event, is due for calibration or needs a battery replaced. With this detector, you can choose the indicator that works for your operating procedures.
Alarms that are easy to see and hear
When the detector alarms, the LEDs around the detector illuminate red for high visibility. Additional vibrating and audible alarms ensure youre aware of danger - even in noisy environments.
Assign detectors to workers and locations
If theres a gas event, you can easily determine who used the detector and where.
Easy-to-read display for multiple languages
See real-time gas readings in your choice of English, Spanish, French, Korean, Japanese, Russian or other languages.
Data logging with rolling 24-hour peak reading
Want to see the highest gas level that a detector encountered? With this detector, you can see the peak gas reading in the past 24 hours, even if it didnt trigger an alarm. So you have the visibility you need to correct small problems before they become bigger ones.
| Standard Measuring Range | 0 to 50 ppm |
| Resolution | 0.1 ppm |
| Operating Temperature | -4 to 104°F (-20 to 40°C) |
| Humidity | 0 to 95% RH (non-condensing) |
| Ingress Protection | IP66/68 |
| Alarms and Type | Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, non-compliance |
| Self-Test | Sensor integrity, circuitry, battery and audible/visual alarms on activation; battery (continuous) |
| Typical Battery Life | 12 months |
| Connected Worker | Bluetooth Low Energy (BLE) |
| User Options | Reset TWA, STEL and Peak readings Change High, Low, TWA and STEL alarm set-points Latching alarms Enable IntelliFlash and non-compliance indicators Set calibration and/or bump test reminders Assign worker and location assignments Language select: English, French, Spanish, German, Italian, Russian, Japanese, Chinese, Korean, Portuguese, Dutch |
| Certifications and Approvals | CSA, ATEX, IECEx, FCC ID, IC, RED |
| Dimensions | 2.7 x 2.6 x 1.6" (7.0 x 6.7x 4.1 cm) |
| Weight | 3.6 to 4.1 oz (103 to 116 g), depending on installed sensor |
