null
close
close
click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Fast & Reliable

  • US & Canada Delivery

Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit

No reviews yet Write a Review
$630.55
SKU:
15115-101
UPC:
874847006798
Condition:
New
Availability:
In Stock
5 customers are viewing this product

Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit

$630.55

Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit Product Description

Electro-Polished Edge Mount Trim Tab Kit12-Gauge Blades / 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. All the same features of the Edge Mount series with the additon of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12" blades giving them a 3" lower mounting height.Blades are constructed of Electro-Polished 12 gauge lase cut 304 stainless steel with 1" turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

Lenco 15115101 Attributes

  • Tab Size: 12 Inch Length X 9 Inch Width
  • Material: Stainless Steel

Lenco 15115101 Features & Benefits

  • Fast response electric actuators
  • Fully submersible actuators
  • Plug and Play waterproof connectors
  • Switch Kit sold seperately
  • Limited 3 year warranty

Lenco 15115101 Installation Instructions

  • Trim_Tab_Manual_TCHDAT.pdf

Lenco 15115101 Technical Bulletins

  • size_diagram_edge_mount_TCHDAT.pdf
  • standard_performance_diagram_TCHDAT.pdf

12" x 9" Electro-Polished Edge Mount Trim Tab Kit
12 Volt

Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Electro-Polished blades are constructed of 12-gauge 304 stainless steel with 1" turned up edges and an 85x inside taper and 1/8" diameter stainless steel hinge pin. The actuators mount at the trailing edge of the blades, requiring 1/2" less transom height than the standard mount tabs.

Kits include:
  • (2) 12-gauge stainless steel Electro-Polished blades
  • (2) 15054-001 actuator with 6' leads and Deutsch connectors
  • (2) 30133-103 20' actuator extension wiring harnesses
  • (2) 15085-001 upper mounting brackets with gland seal
  • (2) 50014-001 lower mounting brackets
  • Lenco owner's/installation manual
  • Stainless steel mounting hardware


Specifications:
  • Boat Length:14' - 18'
  • L" x W":12" x 9"
  • Hinge Height:2"
  • Minimun Transom Height:11"

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.



These skilled product experts from Lenco are designed to provide you with the products you will use by using long-term effective resources.

Lenco Upper Mounting Bracket w/Gland Seal (2008-Present)
Lenco Compact Upper Mounting Bracket - 2 Screws 1 Wire
Lenco Standard Upper Mounting Bracket - 3 Screws 1 Wire
Lenco Standard Lower Mounting Bracket - 3 Bolt
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" Diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter


Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit

Lenco Marine
How to describe Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit
What is the working voltage of the product
What is the material of Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit
What is the weight of the product
What is the size
What is the constuction of product
What is the finishing of the product

Lenco Marine

Trim tabs make the single most important difference in the way your boat will ride and perform. Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety whether on a high-performance, family cruiser or small skiff. Lenco's ballscrew design is more reliable, twice as powerful and features an instant response which makes them very user friendly.

How to describe Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit

These skilled product experts from Lenco are designed to provide you with the products you will use by using long-term effective resources.
  • 12" x 9" Electro-Polished Edge Mount Trim Tab Kit 12 Volt
  • Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections.
  • Electro-Polished blades are constructed of 12-gauge 304 stainless
  • Precision and responsiveness for a smooth and seamless trimming experience.
  • Fully waterproof and submersible, so you can trim your lawn in any conditions.
  • Connections are plug-and-play, so you don't need to worry about wiring.

Edge Mount Trim Tab Kits are the perfect choice for those looking to add an edge mount to their boat. This kit includes everything you'll need to install a trim tab system on your boat, including a trim tab, mounting hardware, and an installation guide.

What is the working voltage of the product

12
  • 12" x 9" Electro-Polished Edge Mount Trim Tab Kit 12 Volt
  • Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections.
  • Electro-Polished blades are constructed of 12-gauge 304 stainless
  • Precision and responsiveness for a smooth and seamless trimming experience.
  • Fully waterproof and submersible, so you can trim your lawn in any conditions.
  • Connections are plug-and-play, so you don't need to worry about wiring.
  • All the same features of the Edge Mount series with the addition of Electro-Polished blades.
  • Electro-Polish adds a mirror finish and the ultimate corrosion protection
  • Edge Mount series with the addition of Electro-Polish blades.
  • Electro-polish adds a mirror finish and the ultimate corrosion protection.
  • Best for boats that are out in the water for long periods of time or boats with high salt water exposure.

What is the material of Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit

Stainless Steel

What is the weight of the product

19

What is the size

12"L x 9"W

What is the constuction of product

Stainless Steel

What is the finishing of the product

Electro-Polished


Save $411 when you buy the Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit for only $562 from NVN Marine! Same day shipping before 3pm.

Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit Technical Specifications

Type: 

Boat Outfitting | Trim Tabs

Vendor: 

Lenco Marine

Weight: 

17.0 lb

Construction: 

Stainless Steel

Shipping & Return Policy — EquipTestPro
Last Updated: February 1, 2026
Legal Policies

Shipping & Return Policy

Everything you need to know about orders, cancellations, refunds, and delivery.

🌎
Section 01
Shipping Destinations

EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.

Please Note: Certain products are subject to restrictions and cannot be shipped to all destinations. Product-specific shipping availability is noted on each item's detail page. We do not currently ship to international destinations outside of Canada and the United States.
💲
Section 02
Shipping Rates

When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.

Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.

⚖️
Section 03
Weight-Based Shipping

For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.

Rounding Policy: To align with the policies of our shipping carriers, all item weights are rounded up to the next full pound when calculating shipping costs.

For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.

⚠️
Section 04
Product Restrictions

Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:

  • Hazardous or regulated materials
  • Oversized or freight-class items
  • Products restricted by provincial or state import regulations
  • Items that cannot be air-shipped due to their composition

Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.

🕐
Section 05
Order Processing

Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.

1
Order Confirmed You receive an email confirmation with your order details.
2
Order Processed Your order is verified and prepared for shipment (1–2 business days).
3
Shipped You receive a tracking number by email once your package is dispatched.
4
Delivered Delivery timelines vary by destination and carrier availability.
Section 01
Order Cancellation Rights

You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.

The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.

To exercise your cancellation right, notify us with a clear written statement by:

  • Email: info@equiptestpro.com
  • Online form: equiptestpro.com/contact-us
💳
Section 02
Cancellation Processing Fees

The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.

Customer-Initiated
10%

A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.

Company-Initiated (Item Unavailable)
$0

If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.

Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.

Section 03
Conditions for Returns

To be eligible for a return, all of the following conditions must be met:

  • The Goods were purchased within the last 30 days
  • The Goods are in their original, undamaged packaging
  • The Goods are unused and unaltered from the condition received
  • A valid receipt or proof of purchase accompanies the return
Sale Items: Only regular-priced Goods are eligible for a refund. Items purchased on sale or at a discounted price cannot be refunded. This exclusion may not apply where prohibited by applicable law.

We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.

🚫
Section 04
Non-Returnable Goods

The following items are not eligible for return under any circumstances:

  • Goods made to your specifications or clearly personalized
  • Goods that by their nature are not suitable for return, deteriorate rapidly, or where the expiry date has passed
  • Goods not suitable for return due to health protection or hygiene reasons that have been unsealed after delivery
  • Goods that, after delivery, have become inseparably mixed with other items by their nature
  • Goods purchased on sale or at a promotional discount
📬
Section 05
How to Return Goods

You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.

Important: We strongly recommend using an insured and trackable mail service. We cannot be held responsible for Goods damaged or lost during return shipment, and we are unable to issue a refund without confirmed receipt of the returned Goods or verifiable proof of delivery.
Section 06
Refund Timeline

You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:

1
Transit to Us 5 to 10 business days for us to receive your return from the shipper.
2
Return Processing 3 to 5 business days to inspect and process your return once received.
3
Bank Processing 5 to 10 business days for your bank to post the refund to your account.

We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.

🎁
Section 07
Gift Returns

If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.

If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.

Questions? We're here to help.

Reach out to our support team for assistance with any order or return.

Not Applicable

Condition: NA

Frequently Asked Questions

  • How do I request a quote?
    To request a quote for pricing on any item found on our site, please click on our "REQUEST A QUOTE" link. Fill out and submit the form, one of our representatives will contact you when the quote is ready.
  • What payment options do I have?
    EquipTestPro accepts a variety of payment options for your convenience. For prepayment, we accept all major credit cards (MasterCard, Visa, Amex, Discover), Purchase Orders, and wire transfers.
  • How do I retturn items?
    All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.

    Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.

    Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.

    (Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)

    Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.

Canada & US Shipping
Rewards Program
Secure Shopping
30-Day Free Returns