AEMC MN09 Current Clamp for AC, 100 A to 240 A

Availability: 2 to 3 Weeks

AEMC Instruments MN09 Offers

An ergonomic mini-clamp for facilitating work loads to measure low and medium currents from 0.01 to 240 A AC.

Features

• Measures low and medium currents from 0.01 A to 240 A AC
• Jaws makes ‘hooking’ onto cables easy, even in areas of restrictive access
• Jaws can grip conductors up to 20mm in diameter
• Compatible with all multimeters and testers on the market
• Can measure currents by means of the DC or AC voltage calibres

Applications

• measurement on current transformer outputs, on oscilloscopes and leakage currents

AEMC Instruments MN09 Specifications

Specifications

Current Range	0.5 to 240 A AC
Current Transformation	1000/1
Output Signal	1 mA AC / A AC (240 mA for 240 A)
Accuracy and Phase Shift
Primary Current	0.5 to 10 A, 10 A to 40 A, 40 to 100 A, 100 to 240 A
% Accuracy of Output Signal	≤ 3% + 0.5 mA, ≤ 2.5% + 0.5 mA, ≤ 2% + 0.5 mA, ≤ 1% + 0.5 mA
Phase Shift	Not specified, ≤5°, ≤3°, ≤2.5°
Electrical Specifications
Bandwidth	40 Hz to 10 kHz
Crest Factor	3 for a current of 200 A RMS
Maximum Currents	200 A continuous for a frequency 3 kHz (limitation proportional to the inverse of one third of frequency beyond)
Load Impedance	≤10 ɷ
Operating Voltage	600 VRMS
Common Mode Voltage	600 V category III and pollution degree 2
Influence of Adjacent Conductor	≤ 15 mA / A at 50 Hz
Influence of Conductor Position in Jaws	≤ 0.5% of output signal at 50/60 Hz
Load Influence 0.2 to 10 ɷ	<0.5 % on measurement < 0.5° on phase
Influence of Frequency	<3 % of output signal 40 Hz to 1 kHz
Influence of Crest Factor	<4 % of output signal for a crest factor of 3 and current 200 of A RMS
Mechanical Specifications
Operating Temperature	14 to 131°F (-10 to 55°C)
Storage Temperature	-40 to 158°F (-40 to 70°C)
Influence of temperature	≤ 0.15% of output signal per 10°K
Relative Humidity for Operation	0 to 85% RH decreasing linearly above 95°F (35°C)
Influence of Relative Humidity	<0.2 % of output signal from 10 to 85 % RH
Operating Altitude	0 to 2000 m
Maximum Jaw Opening	20 mm
Clamping Capacity	Cable: Ø max 20 mm Busbar: 1 busbar of 20 x 5 mm
Casing Protection Rating	IP40 (IEC529)
Drop Test	1m (IEC68-2-32)
Shock Resistance	100 g (IEC68-2-27)
Vibration Resistance	10 / 55/10 Hz, 0.15 mm (IEC68-2-6)
Self-Extinguishing Capability	Casing: UL94 V2Jaws: UL94 V0
Output	1.5 m two-wire lead with double or reinforced insulation terminated by 2 elbowed male safety plugs (4mm)
Dimensions	5.3 x 2.0 x 1.18" (135 x 51 x 30 mm)
Weight	0.39 lbs (180 g)
Safety Specifications
Electrical Safety	Instrument with double insulation or reinforced insulation between the primary, the secondary and the grippable part located under the guard as per IEC1010-1 & IEC1010-2-032 600V categoryIII, pollution degree 2 300V category IV, pollution degree 2
Electromagnetic Compatibility	EN50081-1: class B EN50082-2 Electrostatic discharge: IEC1000-4-2 Radiated field: IEC1000-4-3 Fast transients: IEC1000-4-4 Magnetic field at 50/60Hz: IEC1000-4-8

What's included with the AEMC Instruments MN09

• AEMC MN09 Current Clamp for AC, 100 A to 240 A

AEMC MN09 Current Clamp for AC, 100 A to 240 A. Great savings and get fast delivery when you buy now from EquipTestPro.com.