Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Availability: 1 to 2 Weeks
Dent EXC-I-WI-C ELITEpro XC Energy Datalogger with Wi-Fi, Croc Clips & CaseThe Dent ELITEpro XC Energy Datalogger is ideal for the measurement and analysis of energy consumption data, gathered from analog voltage and current inputs. This model features an internal Wi-Fi antenna, includes a set of crocodile clips and a case, and is designed for international use. The ELITEpro XC features configurable analog inputs with a voltage transducer range of 0 to 10VDC and a current loop transducer range of 0 or 4 to 20mA. This datalogger may be used on single or three-phase systems, using phase-to-phase services of a range of 80 to 600V (AC or DC) when line powered and 0 to 600V (AC or DC) when externally powered.
The ELITEpro XC is easy to use, with a simple setup and DENT's patended PhaseChek indicator to ensure proper instillation. This datalogger communicated quickly via USB connection and features a standard Ethernet port. Its compact, durable design means the ELITEpro XC can fit easily inside of breaker panels-making it the ideal datalogger for energy audits, surveys, and load profiling.
Technical Specifications:
Communication Specifications:
* Performance varies at 400 Hz operation. Contact the factory for details. † ELITEpro XC loggers that are equipped with a Wi-Fi package contain an internal antenna. An external antenna is optional. You may toggle between using the internal and external antenna (if it is available on your logger) by checking or unchecking the Use External Antenna checkbox in ELOG. US/NORTH AMERICAN ELITEpro XC configuration includes 4 color (black, blue, red, white) voltage leads and croc clips. INTERNATIONAL ELITEpro XC configuration includes 3 black voltage lead connections, 1 white connection (neutral) and 5 color (black, blue, red, white, yellow) voltage leads and croc clips.
| Service Type | Single phase (two wire or three wire), three phase-four wire (WYE), three phase-three wire (Delta), DC systems (solar/battery) |
| Voltage Channels | 3 channels, CAT III, 0 to 600 VAC (line-to-line) or 600 VDC |
| Current Channels | 4 channels, 0.67 VAC max, +/- 1 VDC Ideal for 333 mV full scale CTs |
| Maximum Current Input | External transducer dependent 200% of current transducer rating (mV CTs) Measure up to 6000 A with RoCoil CTs. |
| Measurement Type | True RMS using high-speed digital signal processing (DSP) |
| Line Frequency | DC/50/60/400 Hz* |
| Waveform Sampling | 12 kHz |
| Channel Sampling Rate | 0.125 seconds |
| Integration Period | 1, 3, 15, 30 seconds; 1, 2, 5, 10, 15, 20, and 30 minutes; 1 and 12 hours, 1 day |
| Energy Measurements | Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Displacement Power Factor (dPF). All parameters for each phase and for system total |
| Analog Measurements | 0 to 10 V, 0 or 4 to 20 mA current loop Non-isolated, external power for current loop. User scaling for sensor reporting in physical units |
| Accuracy | Better than 1% (<0.2% typical) for V, A, kW, kVAR, kVA, PF, Analog |
| Resolution | 0.01 A, 0.1 V, 1 W, 1 VAR, 1 VA, 0.01 PF, 0.01 ANA |
| LED Indicators | Tri-color (red, green, blue): 1 LED indicates communication (blue for wireless, Bluetooth® or Ethernet), 4 LEDs for correct phasing (PhaseChek™). |
| Line-Power | From L1 Phase to L2 Phase. 80 to 600 V (AC or DC) CAT III DC/50/60/400 Hz, 125 mA, 5 W, or 10 VA max Non-user replaceable 0.5 A internal fuse protection. |
| Power In | 6 to 10 VDC, 500 mA |
| Power Out | 6 VDC, 200 mA max |
| USB (Standard) | USB standard (type B) 6' (1.8 m) A-to-B USB cable (included) |
| Ethernet (Standard) | Standard RJ-45 connector supports 10/100 MB Ethernet over Cat 5 or better Configure for DHCP or static IP |
| Bluetooth Wireless Technology (Optional) | Internal antenna with 10 to 100' range (typical) Requires Bluetooth® wireless technology adapter on Windows PC Adapter must support the Serial Port Profile (SPP). |
| Wi-Fi Adapter† (optional) | Wi-Fi option available as two separate configurations: Internal antenna: typical range 75 to 300' External 3 dbi antenna: typical range 150 to 300' |
| Operating Temperature | 20 to 140 °F (-7 to 60 °C) |
| Operating Humidity | 5 to 95% non-condensing |
| Enclosure Type | ABS plastic, 94-V0 flammability rating |
| Weight | 12 ounces (340 g) |
| Dimensions | 8.5 x 2.5 x 1.9" (21.6 x 6.3 x 4.7 cm) |
What happens if your ELITEpro XC is on a local area network at a remote project site, but you're hundreds of miles away, at your office, and need to download data off the meter? Port Forwarding makes it possible to complete the download and, with a little planning, you probably already have everything you need to successfully download your data.
Port forwarding is a name given to the combined technique of:
Port forwarding allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local area network (LAN). In the case of the ELITEpro XC (or ELITEpro SP) with Ethernet, port forwarding allows remote connection between the ELITEpro XC and a computer on another network through the firewall via ELOG software.
For instance, if the ELITEpro XC is on the local area network at a remote project site, but you wish to download data off the meter from the office, you can remotely access the ELITEpro XC from any computer with an Internet connection through ELOG.
Requirements
Prior to beginning, confirm the following information:
Note: The ELITEpro XC itself does not need to be configured for Port Forwarding. All the configuration takes place on the router.
Each router manufacturer uses slightly different software. Check your router's documentation for specific directions on how to port forward with your router's software. Regardless of what software is on your router, you'll be required to enter the same general information.
Instructions
Here are the steps to connecting your networked ELITEpro XC from a different network:
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
