Dynisco PT460XL-30M-6 Abrasive and Corrosive Melt Pressure Transducer, 1000 to 30,000 psi, rigid stem
SKU: PT460XL-30M-6
Availability: 2 to 3 Weeks Dynisco PT460XL-30M-6 Offers The abrasive and corrosive melt pressure transducer has an accuracy better than ±1%. Features Inconel diaphragm Superior temperature stability Internal 80% shunt calibration Applications Abrasive and corrosive pressure measurement Dynisco PT460XL-30M-6 Specifications Specifications Pressure Range 1,000 to 30,000 psi Transducer Configuration Rigid stem, no flexible capillary Snout Length 6
Availability: 2 to 3 Weeks
Dynisco PT460XL-30M-6 Offers
The abrasive and corrosive melt pressure transducer has an accuracy better than ±1%.
Features
- Inconel diaphragm
- Superior temperature stability
- Internal 80% shunt calibration
Applications
- Abrasive and corrosive pressure measurement
Dynisco PT460XL-30M-6 Specifications
Specifications
| Pressure Range | 1,000 to 30,000 psi |
| Transducer Configuration | Rigid stem, no flexible capillary |
| Snout Length | 6" (15 cm) |
| Combined Error | ±1% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2% FSO |
| Maximum Pressure | 2 x full range or 35,000 psi (whichever is less) |
| Configuration | Four active arm bonded Wheatstone bridge strain gage |
| Bridge Resistance | Input: 345 Ohms minimum; Output: 350 Ohms ±10% |
| Output | 3.33 mV/V ±2.0% |
| Zero Balance | ±10% full scale |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1.0% |
| Insulation Resistance | 1,000 megohms at 50 Vdc |
| Maximum Diaphragm Temperature | 750°F (400°C) |
| Standard Wetted Parts | Inconel 718 |
What's included with the Dynisco PT460XL-30M-6
- Dynisco PT460XL-30M-6 Abrasive and Corrosive Melt Pressure Transducer, 1000 to 30,000 psi, rigid stem
Dynisco PT460XL-30M-6 Abrasive and Corrosive Melt Pressure Transducer, 1000 to 30,000 psi, rigid stem. Great savings PLUS Free Shipping when you order today on EquipTestPro.com.
Related Products
