Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Availability: 2 to 3 Weeks
Fluke 2062 OffersFast, easy, and safe troubleshooting, this advanced wire tracer kit features a CAT IV 600 V rating, offering the highest protection on any wire tracer. Spikes up to 8000 V can occur in industrial and utility environments, which is where this kit excels at protecting you from these dangerous levels of transient overvoltage. This protection is crucial for scenarios in environments like industrial plants, factories, and hospitals where critical equipment cannot be offline.
Features
Smarter tracing saves time
The innovative Smart Sensor™ makes wire tracing faster and easier. It locates and displays energized wires within walls, floors, and ceilings on a high-resolution 3.5" (89 mm) TFT LCD color display. Embedded help screens on the display make use easy, whether you're a novice or an expert. While the tip sensor provides an audible tone when locating wires, the Smart Sensor helps visualize and pinpoint the orientation of energized wires, eliminating guesswork.
Wire tracing customized for your application
Whether troubleshooting electrical wiring and equipment in residential homes, commercial buildings, or high-voltage utility plants, this advanced wire tracer kit can find breaks or opens and shorts. Its different modes and functions give you the flexibility to troubleshoot a wide range of electrical wiring and circuitry problems you may encounter on the job.
Four receiver tracing modes
The included receiver detects the signal in wires and cables using two methods: passive tracing without the transmitter for non-contact voltage detection and active tracing with the transmitter for all other modes. The receiver's tip sensor can trace wires in corners, tight spaces, and junction boxes.
Three transmitter power modes
The included transmitter works on energized and de-energized circuits up to CAT IV 600 V and features high, low, and loop modes. These modes change the strength of the induced signal and can help provide more accurate results, depending on the circuit you're tracing.
Applications
| Receiver | |
| Measurement Category | CAT IV 600 V |
| Operating Voltage/Frequency | Voltage: 600 V AC/DCFrequency:Energized: 6.25 kHzDe-energized: 32.768 kHz |
| Signal Indications | Numeric, bar graph display, and audible beep |
| Response Time | Smart sensor: 500 msTip sensor (energized/de-energized): 500 msNCV: 500 msBattery monitoring: 5 seconds |
| Range Detection (open air) | Smart sensor direction indication mode≤6" (15 cm), 230 V AC, high mode, sensitivity level 2Tip sensor: EnergizedMaximum distance via air: Up to 20' (6.1 m)Pinpointing: Approximately 1.97" (5 cm)Tip sensor: De-energizedMaximum distance via air: Up to 14.7' (4.5 m)Pinpointing: Approximately 1.97" (5 cm)NCV (40 to 400 Hz)Maximum sensitivity: 90 V up to 6.6' (2 m)Minimum sensitivity: 600 V up to 0.4" (1 cm) |
| Display | Size: LCD 3.5" (89 mm)Dimensions: 2.76 x 2.07" (70 x 52 mm)Resolution: 480 x 320Type: Color TFT LCDColor: 16-bitBacklight: Yes |
| Environmental | Operating temperature: -4 to 122°F (-20 to 50°C)Operating humidity:45%: -4 to <50°F or 104 to 122°F (-20 to <10°C or 40 to 50°C)95% (non-condensing): 50 to 86°F (10 to <30°C)75%: 86 to <104°F (30 to <40°C)Operating altitude: 6261' (2000 m)Pollution degree: 2IP rating: IP40Drop test: 3.28' (1 m) |
| Power | Type: 4 x AA (alkaline)Consumption (typical): 110 mABattery life: Approximately 20 hoursLow battery indicator: Yes |
| Dimensions | Approximately 10.92 x 4.43 x 2.55" (277 x 112 x 65 mm) |
| Weight | Approximately 1.2 lbs (0.55 kg) |
| Transmitter | |
| Measurement Category | CAT IV 600 V |
| Operating Voltage/Frequency | Voltage: 600 V AC/DCFrequency:Energized/Loop: 6.25 kHzDe-energized: 32.768 kHz |
| Signal Indications | LEDs and audible beep |
| Response Time | Line voltage monitoring: 1 secondBattery voltage monitoring: 5 seconds |
| Current Output of Signal (typical) | Energized circuit:High mode: 60 mA rmsLow mode: 30 mA rmsDe-energized circuit:High mode: 110 mA rmsLow mode: 40 mA rmsLoop mode with test leads: 160 mA rmsLoop mode with AC current clamp: 385 mA rms |
| Signal Voltage Output (nominal) | Energized circuit:High mode: 14 W at 230 V AC/50 Hz, 3.33 kΩ at 230 V ACLow mode: 4.6 W at 230 V AC/50 Hz, 11.5 kΩ at 230 V ACDe-energized circuit:High mode: 31 Vrms, 140 Vp-p, 0.86 W at 1 kΩ loadLow mode: 27.5 Vrms, 120 Vp-p, 0.1 W at 1 kΩ loadLoop mode with test leads: 32 Vrms, 140 Vp-p, 0.87 W at 1 kΩ loadLoop mode with AC current clamp: 31 mV, 0.89 W at 1 Ω load |
| Display | Size: LEDsType: LEDsColor:Operating mode LEDs: RedBattery status LEDs: Green, yellow, red |
| Environmental | Operating temperature: -4 to 122°F (-20 to 50°C)Operating humidity:45%: -4 to <50°F or 104 to 122°F (-20 to <10°C or 40 to 50°C)95% (non-condensing): 50 to 86°F (10 to <30°C)75%: 86 to <104°F (30 to <40°C)Operating altitude: 6261' (2000 m)Transient protection: 8 kV (1.2/50 µS surge)Pollution degree: 2IP rating: IP40Drop test: 3.28' (1 m) |
| Power | Type: 8 x AA (alkaline)Consumption (typical):High/low mode: 70 mALoop mode with clamp: 90 mAConsumption without signal transmission: 10 mABattery life:High/low mode: Approximately 25 hoursLoop mode: Approximately 18 hoursFuse: 1.6 A, 700 V, fast-acting, Ø0.2 x 1.3" (Ø6 x 32 mm), 50 kA interruptLow battery indicator: Yes |
| Dimensions | Approximately 7.2 x 3.66 x 1.97" (183 x 93 x 50 mm) |
| Weight | Approximately 1.25 lbs (0.57 kg) |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
