US Dollar
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Availability: 2 to 3 Weeks
Fluke 2062 OffersFast, easy, and safe troubleshooting, this advanced wire tracer kit features a CAT IV 600 V rating, offering the highest protection on any wire tracer. Spikes up to 8000 V can occur in industrial and utility environments, which is where this kit excels at protecting you from these dangerous levels of transient overvoltage. This protection is crucial for scenarios in environments like industrial plants, factories, and hospitals where critical equipment cannot be offline.
Features
Smarter tracing saves time
The innovative Smart Sensor™ makes wire tracing faster and easier. It locates and displays energized wires within walls, floors, and ceilings on a high-resolution 3.5" (89 mm) TFT LCD color display. Embedded help screens on the display make use easy, whether you're a novice or an expert. While the tip sensor provides an audible tone when locating wires, the Smart Sensor helps visualize and pinpoint the orientation of energized wires, eliminating guesswork.
Wire tracing customized for your application
Whether troubleshooting electrical wiring and equipment in residential homes, commercial buildings, or high-voltage utility plants, this advanced wire tracer kit can find breaks or opens and shorts. Its different modes and functions give you the flexibility to troubleshoot a wide range of electrical wiring and circuitry problems you may encounter on the job.
Four receiver tracing modes
The included receiver detects the signal in wires and cables using two methods: passive tracing without the transmitter for non-contact voltage detection and active tracing with the transmitter for all other modes. The receiver's tip sensor can trace wires in corners, tight spaces, and junction boxes.
Three transmitter power modes
The included transmitter works on energized and de-energized circuits up to CAT IV 600 V and features high, low, and loop modes. These modes change the strength of the induced signal and can help provide more accurate results, depending on the circuit you're tracing.
Applications
| Receiver | |
| Measurement Category | CAT IV 600 V |
| Operating Voltage/Frequency | Voltage: 600 V AC/DCFrequency:Energized: 6.25 kHzDe-energized: 32.768 kHz |
| Signal Indications | Numeric, bar graph display, and audible beep |
| Response Time | Smart sensor: 500 msTip sensor (energized/de-energized): 500 msNCV: 500 msBattery monitoring: 5 seconds |
| Range Detection (open air) | Smart sensor direction indication mode≤6" (15 cm), 230 V AC, high mode, sensitivity level 2Tip sensor: EnergizedMaximum distance via air: Up to 20' (6.1 m)Pinpointing: Approximately 1.97" (5 cm)Tip sensor: De-energizedMaximum distance via air: Up to 14.7' (4.5 m)Pinpointing: Approximately 1.97" (5 cm)NCV (40 to 400 Hz)Maximum sensitivity: 90 V up to 6.6' (2 m)Minimum sensitivity: 600 V up to 0.4" (1 cm) |
| Display | Size: LCD 3.5" (89 mm)Dimensions: 2.76 x 2.07" (70 x 52 mm)Resolution: 480 x 320Type: Color TFT LCDColor: 16-bitBacklight: Yes |
| Environmental | Operating temperature: -4 to 122°F (-20 to 50°C)Operating humidity:45%: -4 to <50°F or 104 to 122°F (-20 to <10°C or 40 to 50°C)95% (non-condensing): 50 to 86°F (10 to <30°C)75%: 86 to <104°F (30 to <40°C)Operating altitude: 6261' (2000 m)Pollution degree: 2IP rating: IP40Drop test: 3.28' (1 m) |
| Power | Type: 4 x AA (alkaline)Consumption (typical): 110 mABattery life: Approximately 20 hoursLow battery indicator: Yes |
| Dimensions | Approximately 10.92 x 4.43 x 2.55" (277 x 112 x 65 mm) |
| Weight | Approximately 1.2 lbs (0.55 kg) |
| Transmitter | |
| Measurement Category | CAT IV 600 V |
| Operating Voltage/Frequency | Voltage: 600 V AC/DCFrequency:Energized/Loop: 6.25 kHzDe-energized: 32.768 kHz |
| Signal Indications | LEDs and audible beep |
| Response Time | Line voltage monitoring: 1 secondBattery voltage monitoring: 5 seconds |
| Current Output of Signal (typical) | Energized circuit:High mode: 60 mA rmsLow mode: 30 mA rmsDe-energized circuit:High mode: 110 mA rmsLow mode: 40 mA rmsLoop mode with test leads: 160 mA rmsLoop mode with AC current clamp: 385 mA rms |
| Signal Voltage Output (nominal) | Energized circuit:High mode: 14 W at 230 V AC/50 Hz, 3.33 kΩ at 230 V ACLow mode: 4.6 W at 230 V AC/50 Hz, 11.5 kΩ at 230 V ACDe-energized circuit:High mode: 31 Vrms, 140 Vp-p, 0.86 W at 1 kΩ loadLow mode: 27.5 Vrms, 120 Vp-p, 0.1 W at 1 kΩ loadLoop mode with test leads: 32 Vrms, 140 Vp-p, 0.87 W at 1 kΩ loadLoop mode with AC current clamp: 31 mV, 0.89 W at 1 Ω load |
| Display | Size: LEDsType: LEDsColor:Operating mode LEDs: RedBattery status LEDs: Green, yellow, red |
| Environmental | Operating temperature: -4 to 122°F (-20 to 50°C)Operating humidity:45%: -4 to <50°F or 104 to 122°F (-20 to <10°C or 40 to 50°C)95% (non-condensing): 50 to 86°F (10 to <30°C)75%: 86 to <104°F (30 to <40°C)Operating altitude: 6261' (2000 m)Transient protection: 8 kV (1.2/50 µS surge)Pollution degree: 2IP rating: IP40Drop test: 3.28' (1 m) |
| Power | Type: 8 x AA (alkaline)Consumption (typical):High/low mode: 70 mALoop mode with clamp: 90 mAConsumption without signal transmission: 10 mABattery life:High/low mode: Approximately 25 hoursLoop mode: Approximately 18 hoursFuse: 1.6 A, 700 V, fast-acting, Ø0.2 x 1.3" (Ø6 x 32 mm), 50 kA interruptLow battery indicator: Yes |
| Dimensions | Approximately 7.2 x 3.66 x 1.97" (183 x 93 x 50 mm) |
| Weight | Approximately 1.25 lbs (0.57 kg) |
Everything you need to know about orders, cancellations, refunds, and delivery.
EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.
When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.
Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.
For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.
For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.
Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:
Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.
Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.
You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.
The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.
To exercise your cancellation right, notify us with a clear written statement by:
The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.
A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.
If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.
Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.
To be eligible for a return, all of the following conditions must be met:
We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.
The following items are not eligible for return under any circumstances:
You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.
You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:
We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.
If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.
If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.
Reach out to our support team for assistance with any order or return.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
