Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Availability: 2 to 3 Weeks
Fluke Networks LIQ-KIT-IS60 OffersSolve connectivity problems with this Cable and Network tester, the testing solution for verifying cable performance up to 10 gigabytes per second. Moreover, this network tester validates cable performance using frequency-based measurements and a wire map of the cable under test. Completely eliminating the need for another device, this tester performs ping tests to verify connectivity and nearest switch diagnostics to identify key network issues and validate switch configurations.
Features
Active network diagnostics
Diagnostic protocols: Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP), Internet Control Messaging Protocol (ICMP), Dynamic Host Configuration Protocol (DHCP)
IP address setup: LinkIQ address, DNS server, gateway for IPv4 or v6 either manually or via DHCP
IP ping test results: Four response time results for target, DNS server(s), gateway, plus average and number lost
Nearest device diagnostics (if available through diagnostic protocols): Switch name / IP + MAC address, port number, VLAN name, advertised data rates, advertised duplex
Power over ethernet compatibility: Ethernet alliance certified to IEEE 802.3af/at/bt, hardware negotiation with signature resistance, software negotiation with LLDP/CDP
Power over ethernet diagnostics: Advertised power class (0 to 8), advertised available power, powered pairs, diagnostics for both single and dual signatures
Power over ethernet measurements: Loaded voltage (V), loaded power (W)
Port blink: Blink the light of the connected port
Cable testing you trust
Capable of measuring lengths up to 1000' (305 m) and providing distance to faults including opens, shorts, and unterminated cables, the LinkIQ™ uses the remote ID to acquire a complete wire map of the cable pairs, which helps identify miswired and split pairs.
The primary cable testing feature of the LinkIQ™ is the cable performance test, which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements.
Using IEEE standards-based measurements ensures tested links meet performance requirements, unlike transmission testers, which only provide that specific test devices can communicate over the link.
Operators may set performance requirements from 10 Mb/s ti 10 Gb/s for a simple pass/fail indication.
Network testing you need
Along with the robust cable testing features, the LinkIQ™ also provides detailed information on the nearest connected switch and connectivity testing with IP ping. The LinkIQ™ negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name and IP address, the port number, and the VLAN information.
The ping test verifies connectivity to devices on the local network or the internet and supports IPv4 and v6. The LinkIQ's address may be set up manually or through DHCP. Once set up, the ping test is run as part of the autotest when a switch is detected. Results of the ping test include the identification and response time of four pings to the target, the DNS server, and gateway.
In-depth PoE testing
While power over Ethernet makes installation devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators, and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that IEEE offers three PoE standards, the term "PoE" is not registered, and there are a variety of non-standards-compliant implementations as well.
To simplify PoE installation and troubleshooting, the LinkIQ™ displays the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ™ will place a load on the connection to ensure the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ™ has been certified by the Ethernet Alliance to IEEE-802.3™ standards for reliable multivendor interoperability.
LinkWare™ documentation
The LinkIQ™ provides complete documentation abilities for the tests it performs. Up to 1000 results with descriptive names can be stored and recalled in the tester. Test names and numbers automatically increment as each is saved ("annex B-1", "annex B-2", "annex B-3", etc.), saving lots of time when testing cables in sequence.
Report data may be exported to a PC for documentation purposes. The LinkIQ uses LinkWare™ PC, Fluke Networks' reporting software, which supports a variety of testers going back 20 years and is the industry's de-facto reporting solution with tens of thousands of active users. LinkWare can be used to store the results and generate PDF reports.
Applications
| Cable Test Specifications | |
| Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
| Commissioning Autotest | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, wire map onlyTest Speed: 6 seconds for lengths <230' (70 m) |
| Cable Types | Balanced twisted-pair cablingUnshielded twisted-pairScreened twisted-pair2-pair and/or 4-pair |
| Wire Map-Only Tests | Document wire mapLength of each pairDiagnose split pairsUser selectable T568A or T568BUser selectable crossover settings (straight through, half-crossover, full-crossover)Test speed: 1 second for lengths <394' (120 m) |
| Length (Maximum) | 1000' (305 m) |
| Nominal Velocity of Propagation (NVP) | User settable |
| Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probeGenerates analog tones compatible with general analog probes |
| Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
| General Specifications | |
| Vibration | Random, 2 g, 5 Hz to 500 Hz |
| Drop | 1 m drop, 6 sides |
| Power Adapter | Input: 100 to 240 V AC ±10%, 50/60 HzOutput: 15 V DC, 2 A maximumA class II |
| Host Interface | USB-C |
| Display | 800 x 480 color capacitive multi-touch |
| Environmental Conditions | Operating temperature: 32 to 113°F (0 to 45°C)Storage Temperature: -14 to 140°F (-10 to 60°C)Operating relative humidity: 0 to 90% from 32 to 95°F (0 to 35°C), 0 to 70% from 95 to 113°F (35 to 45°F)Operating altitude: 13,123' (4000 m), 10,499' (3200 m) with ac adapter |
| Battery | Type: Lithium-ion, 3.6 V, 6400 mAhLife: 8 hours typicalCharge time: 4.5 hoursCharging temperature range: 32 to 104°F (0 to 40°C) |
| Supported Languages | English, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portugese |
| Dimensions | 8.5 x 4.5" (21.6 x 11.4 cm) |
| Weight | 1.38 lbs (624 g) |
Everything you need to know about orders, cancellations, refunds, and delivery.
EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.
When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.
Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.
For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.
For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.
Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:
Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.
Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.
You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.
The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.
To exercise your cancellation right, notify us with a clear written statement by:
The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.
A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.
If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.
Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.
To be eligible for a return, all of the following conditions must be met:
We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.
The following items are not eligible for return under any circumstances:
You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.
You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:
We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.
If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.
If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.
Reach out to our support team for assistance with any order or return.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
