Hioki RM3543 Resistance HiTester

Availability: 2 to 3 Weeks

Hioki RM3543 Offers

Features

• Measure 0.1 mΩ with a high accuracy of ±0.16%
• Superb repeatable measurement accuracy
• User-friendly operability

Advanced Enough to Measure 0.1 mΩ ±1% Shunts with Room to Spare

The shunt resistance meters provide higher efficiency and accuracy. Using the AVERAGE function, 0.1mΩ ±1% shunts can be mea-sured at a high ±0.16% accuracy and high resolution of 0.01 μΩ

Scaling Function Corrects Differences to Simulate Testing Component Mounted on Board

The scaling function can correct the differences in the measurement resistance values between the component alone and the component mounted on the board. The function is useful in testing a current detection resistor for low resistances such as a shunt resistance.

OVC (Offset Voltage Compensation)

Thermal EMF occurs at the contact point of different metals. This voltage affects measurements, and if large enough, can cause measurement errors. The offset voltage compensation function minimizes the effect of thermal EMF to maintain measurement accuracy. Particularly when measuring shunt resistances and low resistances where the detection voltage is small, OVC is essential to maintain accuracy.

Maximum Measurement Current of 1 A and Pulse Application Function Reduce Heat Generation of Samples

A pulse application function that applies current only during measurement reduces heat generation that may cause unstable resistance measurement values. In addition, the maximum measurement current of 1 A, a thermal electromotive force cancellation function, and an ultra-low noise measurement circuit minimize the variation in the measurement values.

Easy Setup Using Numerical Keypad

The user-friendly interface features a high-contrast graphic LCD display, function keys and numerical keypad. Numbers can be input from the numerical keypad easily and speedily to configure the settings for the comparator.

Hioki RM3543 Specifications

Specifications

Measurement types	Resistance:0.00000 mΩ (10 mΩ range) to 1200.000 Ω
Measurement method	Four-terminal, constant-current DCMeasurement terminals: 22-mm BNC female jacks
Range switching	Comparator on: Auto-range setting according to comparator reference or upper threshold setting.Comparator off: Manual range setting
Zero-Adjustment	Range: -1 to 10 Ω (wiring resistance compensation for two-terminal measurements)
Trigger	Internal or External
Sampling	Fast, Medium, and Slow
Integration time setting function	0.1 to 100.0 ms, PLC*2 setting available1 to 5 PLC @ 50 Hz, 1 to 6 PLC @60 Hz*2. One PLC = one power line cycle (mains waveform period)
Delay	DELAY1 = Set to allow for mechanical delay of trigger input and probing (affects all ranges), from 0.0 to 100.0 msDELAY2 = Set to allow for measurement object response (each range independently), from 0.0 to 100.0 ms
Functions	Self-calibration, probe short-circuit detection, Contact Improver, current mode setting, OVC (offset voltage compensation), settings monitor, retry, average (OFF, 2 to 32 times), scaling, statistical calculations, key-lock, comparator (relative tolerance or absolute range modes), EOM pulse width setting, data export, binary data out-put, auto-memory
Measurement fault detection functions	Out-of-range detection, contact check, current monitor, voltage monitor
Memory storage	30,000 values (volatile memory, no backup)
Interfaces	EXT I/O, RS-232C, Printer, Settings MonitorFunctional terminals (SET MONITOR)GP-IB (Model RM3543-01)
RS-232C bit rates	9,600, 19,200, or 38,400 bps
General Specifications
Operating temperature and humidity	32°F to 104°F (0°C to 40°C), 80% RH or less (non-condensating)
Rated mains supply frequency	50 / 60 Hz
Dimensions	Approx. 10.24 x 3.46 x 11.81" (260 mm W × 88 mm H × 300 mm D)
Weight	Approx. 3.0 kg (105.8 oz)

What's included with the Hioki RM3543

• Hioki RM3543 Resistance HiTester

Hioki RM3543 Resistance HiTester. Get Free Shipping when you buy now from EquipTestPro.com.