US Dollar
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Megger EVCC300 Electric Vehicle Charger Checker is available at EquipTestPro.com with fast shipping and great prices.
Capable of checking mode 2 and single-phase mode 3 (level 1 and two-phase level 2) chargers, this EV charger checker can perform four EV charger safety and operation checks. In addition, this checker increases ground/earth leakage current until the protective device trips to ensure it trips at the correct leakage current level. If the leakage current that trips the device is too low, it will indicate there is an issue with the device or that there is already a high level of leakage present.
Features
Four important safety checks
Nuisance charger supply tripping check
This test will help determine whether the EV charger user is likely to experience nuisance tripping of the RCD or GFCI. This charger checker slowly increases ground/earth leakage current until the protective device trips to ensure it trips at the correct leakage current level. If the leakage current that trips the device is too low it will indicate either an issue with the device or there is already a high level of leakage present.
Four key EV charger operation checks
Applications
| EVSE | Standard: IEC 61851-1:2017 Supply options (set in settings): 1. 230 V single-phase 2. 120 V single-phase 3. 208 V two-phase 4. 240 V two-phase |
| Supply Measurement | Voltage: Range: 5 to 300 V Resolution: 1 V Accuracy: ±5% ±2 digits Measurement: L to N, L to PE and N to PE Reverse polarity indication: L to N, for single-phase option only Frequency: Range: 45 to 65 Hz Resolution: 1 Hz Accuracy: ±1 digit |
| EVSE Interface (EV Charger Function) Tests | 1. Proximity detection (PP) states: Read only No proximity Proximity detected, unlatched Proximity detected, latched 2. Control pilot (CP): Set and read states: State A (disconnected), State B (connected), State C (charging), State D (charging without ventilation), State E (CP short to PE) Read only state: State F - EVSE charger fault condition Maximum voltage: ±14 V Frequency: 940 to 1040 Hz Duty cycle: 8 to 97% Maximum charging current indication according to IEC 61851-1:2017, tables A.7 and A.8 |
| Resistance of Earth Protective Conductor (RPE) | Test current: 200 mA Range: 0 to 10 Ω Resolution: 0.01 Ω Accuracy: ±5% ±2 digits |
| RCD/GFCI Tests | Trip time accuracy: ±1% ±1 ms Trip current accuracy: ±3% (apply to all RCD/GFCI tests) |
| Personal Protection Tests - 230 V Single-Phase | 1. RCD 30 mA AC test: Current: 31.5 mA AC (5% above nominal trip current) Accuracy: ±1.0 mA Maximum test time: 300 ms Polarity selection: 0 and 180° of an input sine wave 2. RCD 6 mA DC test: Ramp: Up at rate of 6 mA in 2.5 seconds, then held at 6 mA DC Accuracy: ±0.5 mA Ramp polarity: Positive and negative ramp Maximum test time: 12.5 seconds Polarity selection: 0 and 180° of an input sine wave |
| Personal Protection Tests - 120 V Single-Phase/240 V Two-Phase | 1. GFCI/CCID 5 mA AC test: Current: 6 mA AC Accuracy: ±0.5 mA Maximum test time: 5.59 seconds Polarity selection: 0 and 180° of an input sine wave 2. GFCI/CCID 20 mA AC test: Current: 21 mA AC (5% above nominal trip current) Accuracy: ±0.5 mA Maximum test time: 5.59 seconds Polarity selection: 0 and 180° of an input sine wave |
| Nuisance Tripping Tests - 230 V Single-Phase | 1. RCD AC Ramp test: Current: AC current ramp up to 30 mA in 2 mA steps Accuracy: ±0.5 mA Step time: 300 ms Maximum test time: 4.5 seconds 2. RCD DC Ramp test: Test current ramp up at rate of 6 mA in 2.5 seconds, then held at 3 mA DC Maximum test time: 11.25 seconds |
| Nuisance Tripping Tests - 120 V Single-Phase/240 V Two-Phase | 1. GFCI/CCID 5 mA AC test: Current: AC current ramp up to 6 mA in 0.5 mA steps Accuracy: ±0.5 mA Step time: 100 ms Maximum test time: 1.2 seconds 2. GFCI/CCID 20 mA AC test: Current: AC current ramp up to 20 mA in 1 mA steps Accuracy: ±0.5 mA Step time: 100 ms Maximum test time: 2 seconds |
| Touch Tests | Voltage: Test current typically ⅓ of RCD nominal test current Contact pad: Dangerous voltage indication at PE conductor |
| Connections | Main test: Type 2 male RPE test return: 0.157" (4 mm) shrouded socket on base of handle |
| Languages | English, French, German and Spanish |
| Environment Conditions | Temperature: Operating: 32 to 104°F (0 to 40°C) Storage: 14 to 158°F (-10 to 70°C) Operating humidity: 90% RH at 104°F (40°C) maximum Maximum altitude: 6561.68' (2000 m) Dust and moisture ingress: IP40 to IEC60529 in use |
| Safety | Standards: IEC 61010-1:2010 EVSE standard: IEC 61851-1:2017 Category: CAT II 300 V |
| Power Supply | 4 x AA cells |
| Dimensions | 9.45 x 3.38 x 7.09" (24 x 8.6 x 18 cm) |
| Weight | 1.28 lbs (583 g) without batteries |
Shop EquipTestPro.com for the best deals on Megger EVCC300 Electric Vehicle Charger Checker. Fast shipping, competitive pricing, and expert support. Visit equiptestpro.com today!
Everything you need to know about orders, cancellations, refunds, and delivery.
EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.
When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.
Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.
For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.
For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.
Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:
Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.
Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.
You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.
The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.
To exercise your cancellation right, notify us with a clear written statement by:
The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.
A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.
If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.
Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.
To be eligible for a return, all of the following conditions must be met:
We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.
The following items are not eligible for return under any circumstances:
You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.
You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:
We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.
If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.
If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.
Reach out to our support team for assistance with any order or return.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
