US Dollar
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Megger MIT30 30kV DC Dielectric Test Set is available at EquipTestPro.com with fast shipping and great prices.
| Insulation ranges | |
| Nominal Test Voltage | 500 V, 250 V (d.c.) |
| Measuring Range | |
| All instruments | 10 k½ - 999 M½ on all ranges |
| Short Circuit Current | 1.5 mA nominal |
| Test Current on Load | 1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364) |
| Accuracy (at 20° C) | ±3%, ±2 digits |
| Continuity ranges | |
| Measuring Range | 0,01 ½ - 99,9 ½ (0 -50 ½ on analogue scale) |
| Open Circuit Voltage | 5 V ±1 V |
| Short Circuit Current | 200 - 215 mA |
| Terminal Characteristics | |
| Accuracy (at 20° C) | ±3% ±2 digits |
| Zero Offset Adjust | 0 - 9 ½ |
| Continuity Buzzer | Operates at < 5 ½ Response time <20 ms |
| Voltage range | |
| Measuring Range | 0 - 600 V a.c. (50/60 Hz) or d.c. |
| Accuracy (at 20° C) | d.c. or a.c. (50/60 Hz) ±1%, ±2 digits |
| Temperature coefficient | <0,1% per °C on all ranges. |
| Default voltmeter | |
| (all modes except off) | Beeps and flash ‘V’ on the display |
| Test inhibit | If more than 50 volts is detected, testing will be inhibited. |
| Temperature and humidity | |
| Operating Range | -10°C to +60°C |
| Operating Humidity | 93% R.H. at +40°C max. |
| Storage Range | -25°C to +70°C |
| Test Result Storage (1000 results) | |
| Job Number | 255 locations |
| Distribution Board no. | 99 locations |
| Circuits | 99 locations |
| Phases | P1, P2, P3 |
| Last recorded result may be recalled to the display. All data can be downloaded to a PC using Download Manager (supplied) or Megger Powersuite Professional of Windows software | |
| Communications | USB interface |
| Environmental Protection | IP54 |
| Fuses | Terminals 500 mA (F) 600 V, 32 x 6 mm Ceramic HBC 10 kA minimum. |
| Display shows if fuse is ruptured. | |
| Safety | Meets the requirements of IEC61010-1 Cat III 600 V phase to earth. |
| Automatic discharge | After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored. |
| Power supply | |
| Battery | 8 x 1,5 V cells IEC LR6 type(AA alkaline). Rechargeable NiCd or NiMH cells may be used. Battery condition is constantly shown on the display as a four-section bargraph. |
| Battery Life | 5000 consecutive tests (5 seconds per test) on any test using 2Ah batteries. Weight |
| All units | 980 gms |
| Dimensions | All units: 203 x 148 x 78 mm (8 x 5.7 x 3.2 inches) |
| E.M.C. | In accordance with IEC61326 including amendment No.1 |
The Megger MIT30 is a portable 30-kV insulation tester that has been developed to undertake tests on UST (ungrounded test samples). It satisfies the demand for a variety of high voltage, high accuracy, and low current applications. The MIT30 is NOT suitable for use on grounded/earthed test samples.
The MIT30 has a test current of up to 330 µA, and user selectable trip levels from 0 to 360 µA. The MIT30 provides protection to the test piece against flashovers (arcing) and further damage in the event of a breakdown. An audible ionization indicator gives an audio indication of any electrical discharges present during the test period.
The MIT30 can be used to perform step-voltage and proof tests which, when incorporated into a routine maintenance program, can aid in predicting potential failure before breakdown occurs.
The MIT30 will operate from a wide range of input voltages and frequencies. The unit will will operate from 85-264 V ac with a frequency range of 47-440 Hz.
Applications
The MIT30 checks the electrical insulation quality and integrity of a wide variety of insulation material on UST ungrounded systems.
Due to the unique combination of up to 30-kV high voltage, high accuracy down to 100 nA, and low current 0-330 µA, the MIT30 has several applications:
Shop EquipTestPro.com for the best deals on Megger MIT30 30kV DC Dielectric Test Set. Fast shipping, competitive pricing, and expert support. Visit equiptestpro.com today!
Everything you need to know about orders, cancellations, refunds, and delivery.
EquipTestPro ships to both Canada and the United States. We are pleased to serve customers across North America with reliable, trackable delivery options.
When you place an order, a flat-rate shipping charge will be applied at checkout based on your order. The applicable rate will be clearly displayed before you complete your purchase.
Flat-rate shipping is calculated to reflect the cost of reliable, insured delivery. The rate shown at checkout is final — no hidden surcharges will be added after your order is placed.
For certain items, shipping costs are calculated based on the weight of the product. The weight of any weight-based item is listed on its product detail page.
For example, an item weighing 3.2 lbs will be rated at 4 lbs for shipping calculation purposes. This policy is standard practice across all major carriers we work with.
Some products sold on EquipTestPro are subject to shipping restrictions due to regulatory, carrier, or safety requirements. These include but may not be limited to:
Where restrictions apply, this will be clearly noted on the product listing. If you have questions about a specific product's shipping eligibility to your location, please contact us before placing your order.
Orders are processed on business days (Monday through Friday, excluding statutory holidays). Orders placed after business hours or on weekends will begin processing the following business day.
You are entitled to cancel your Order within 30 days of receipt without providing a reason, subject to the processing fee structure described below.
The cancellation deadline is 30 days from the date on which you received the Goods, or on which a third party appointed by you (other than the carrier) takes possession of the delivered product.
To exercise your cancellation right, notify us with a clear written statement by:
The following fee structure applies to all cancellations. Please review carefully before requesting a cancellation.
A processing fee of 10% of the total order value will be withheld from your refund to cover payment processing, handling, and administrative costs.
If we cancel your order due to item unavailability, no processing fee will be withheld. You receive a full refund of the amount paid.
Refunds will be issued using the same payment method as the original purchase. No additional fees beyond those described above will be applied.
To be eligible for a return, all of the following conditions must be met:
We reserve the right to refuse returns of any merchandise that does not meet the above conditions, at our sole discretion.
The following items are not eligible for return under any circumstances:
You are responsible for the cost and risk of returning Goods to us. Before sending any items, please contact us at info@equiptestpro.com to obtain the return shipping address.
You should expect to receive your refund within four (4) weeks of delivering your return package to the shipper. In many cases, refunds are processed sooner. The timeline breaks down as follows:
We will process refunds no later than 14 days from the day we receive the returned Goods, using the same payment method as your original purchase.
If the Goods were marked as a gift at the time of purchase and shipped directly to you, a gift credit equal to the return value (less any applicable processing fee) will be issued. Once the returned product is received and inspected, a gift certificate will be mailed to you.
If the Goods were not marked as a gift at purchase, or if the gift giver had the order shipped to themselves first, the refund will be issued to the original purchaser.
Reach out to our support team for assistance with any order or return.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
