US Dollar
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
High accuracy and stability of calibration are guaranteed with this insulation and continuity tester, which includes features that ensure safe operations and ease of use. Moreover, this tester insulation test voltages of 250 and 500 V.
Features
Tough
Simple to use
Hands-free use
Safety features
To protect the user and the tester from incorrect use, the device has an extensive range of features known as the Megger Intelligent Safety System including:
Applications
| Insulation Ranges | Nominal test voltage: 500 V, 250 V (DC) |
| Measuring Range | 10 k? to 999 M? on all ranges Short circuit current: 1.5 mA nominal Test current on load: 1 mA at minimum pass values of insulation (as specified in BS7671, HD 384 and IEC 364) Accuracy at 68°F (20°C): ±3%, ±2 digits up to 10 M?, ±5% up to 100 M?, ±30% up to full scale |
| Continuity | Range: 0.01 to 99.9 ? (0 to 50 ? on analogue scale) Open circuit voltage: 5 V ±1 V Short circuit current: 205 mA +10 mA to 5 mA Accuracy at 68°F (20°C): ±3% ±2 digits Range: 0 to 2/20/200/2 k? Open circuit voltage: 1.5 V ±0.5 V Zero offset adjust: 0 to 9 ? |
| Continuity Buzzer | Operates at <5 ? Response time <20 ms |
| Voltage Range | 0 to 600 V AC (50/60 Hz) or DC |
| Default Voltmeter | Beeps and flash 'V' on the display (all modes except off) |
| Test Inhibit | If more than 50 V is detected, testing will be inhibited |
| Temperature | Operating: 14 to 140°F (-10 to 60°C) Storage: -13 to 158°F (-25 to 70°C) |
| Humidity | 93% RH at 104°F (40°C) maximum |
| Test Result Storage | Job number: 255 locations Distribution board number: 99 locations Circuits: 99 locations Phases: P1, P2, P3 Last recorded result may be recalled to the display All data can be downloaded to a PC using Download Manager (supplied) and uploaded into Megger Certsuite (Certsuite.app) |
| Communications | USB interface Environmental protection: IP54 |
| Fuses | Terminals 500 mA (F) 600 V 1.26 x 0.24" (32 x 6 mm) Ceramic HBC 10 kA minimum Display shows if fuse is ruptured |
| Safety | Meets the requirements of IEC61010-1 CAT III 600 V phase to earth |
| Automatic Discharge | After an insulation test the item under test will be discharged automatically Any voltage present will be indicated on the display so that the discharge can be monitored |
| Power Supply | Battery: 8 x 1.5 V cells IEC LR6 type (AA alkaline) Rechargeable NiCd or NiMH cells may be used Battery condition is constantly shown on the display as a four-section bar graph |
| Battery Life | 5000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries |
| EMC | In accordance with IEC61326 including amendment No.1 |
| Dimensions | 8 x 5.7 x 3.2" (203 x 148 x 78 mm) |
| Weight | 34.57 oz (980 g) |
| Insulation Ranges | Nominal test voltage: 500 V, 250 V (DC) |
| Measuring Range | 10 k? to 999 M? on all ranges Short circuit current: 1.5 mA nominal Test current on load: 1 mA at minimum pass values of insulation (as specified in BS7671, HD 384 and IEC 364) Accuracy at 68°F (20°C): ±3%, ±2 digits up to 10 M?, ±5% up to 100 M?, ±30% up to full scale |
| Continuity | Range: 0.01 to 99.9 ? (0 to 50 ? on analogue scale) Open circuit voltage: 5 V ±1 V Short circuit current: 205 mA +10 mA to 5 mA Accuracy at 68°F (20°C): ±3% ±2 digits Range: 0 to 2/20/200/2 k? Open circuit voltage: 1.5 V ±0.5 V Zero offset adjust: 0 to 9 ? |
| Continuity Buzzer | Operates at <5 ? Response time <20 ms |
| Voltage Range | 0 to 600 V AC (50/60 Hz) or DC |
| Default Voltmeter | Beeps and flash 'V' on the display (all modes except off) |
| Test Inhibit | If more than 50 V is detected, testing will be inhibited |
| Temperature | Operating: 14 to 140°F (-10 to 60°C) Storage: -13 to 158°F (-25 to 70°C) |
| Humidity | 93% RH at 104°F (40°C) maximum |
| Test Result Storage | Job number: 255 locations Distribution board number: 99 locations Circuits: 99 locations Phases: P1, P2, P3 Last recorded result may be recalled to the display All data can be downloaded to a PC using Download Manager (supplied) and uploaded into Megger Certsuite (Certsuite.app) |
| Communications | USB interface Environmental protection: IP54 |
| Fuses | Terminals 500 mA (F) 600 V 1.26 x 0.24" (32 x 6 mm) Ceramic HBC 10 kA minimum Display shows if fuse is ruptured |
| Safety | Meets the requirements of IEC61010-1 CAT III 600 V phase to earth |
| Automatic Discharge | After an insulation test the item under test will be discharged automatically Any voltage present will be indicated on the display so that the discharge can be monitored |
| Power Supply | Battery: 8 x 1.5 V cells IEC LR6 type (AA alkaline) Rechargeable NiCd or NiMH cells may be used Battery condition is constantly shown on the display as a four-section bar graph |
| Battery Life | 5000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries |
| EMC | In accordance with IEC61326 including amendment No.1 |
| Dimensions | 8 x 5.7 x 3.2" (203 x 148 x 78 mm) |
| Weight | 34.57 oz (980 g) |
| Insulation Ranges | Nominal test voltage: 500 V, 250 V (DC) |
| Measuring Range | 10 k? to 999 M? on all ranges Short circuit current: 1.5 mA nominal Test current on load: 1 mA at minimum pass values of insulation (as specified in BS7671, HD 384 and IEC 364) Accuracy at 68°F (20°C): ±3%, ±2 digits up to 10 M?, ±5% up to 100 M?, ±30% up to full scale |
| Continuity | Range: 0.01 to 99.9 ? (0 to 50 ? on analogue scale) Open circuit voltage: 5 V ±1 V Short circuit current: 205 mA +10 mA to 5 mA Accuracy at 68°F (20°C): ±3% ±2 digits Range: 0 to 2/20/200/2 k? Open circuit voltage: 1.5 V ±0.5 V Zero offset adjust: 0 to 9 ? |
| Continuity Buzzer | Operates at <5 ? Response time <20 ms |
| Voltage Range | 0 to 600 V AC (50/60 Hz) or DC |
| Default Voltmeter | Beeps and flash 'V' on the display (all modes except off) |
| Test Inhibit | If more than 50 V is detected, testing will be inhibited |
| Temperature | Operating: 14 to 140°F (-10 to 60°C) Storage: -13 to 158°F (-25 to 70°C) |
| Humidity | 93% RH at 104°F (40°C) maximum |
| Test Result Storage | Job number: 255 locations Distribution board number: 99 locations Circuits: 99 locations Phases: P1, P2, P3 Last recorded result may be recalled to the display All data can be downloaded to a PC using Download Manager (supplied) and uploaded into Megger Certsuite (Certsuite.app) |
| Communications | USB interface Environmental protection: IP54 |
| Fuses | Terminals 500 mA (F) 600 V 1.26 x 0.24" (32 x 6 mm) Ceramic HBC 10 kA minimum Display shows if fuse is ruptured |
| Safety | Meets the requirements of IEC61010-1 CAT III 600 V phase to earth |
| Automatic Discharge | After an insulation test the item under test will be discharged automatically Any voltage present will be indicated on the display so that the discharge can be monitored |
| Power Supply | Battery: 8 x 1.5 V cells IEC LR6 type (AA alkaline) Rechargeable NiCd or NiMH cells may be used Battery condition is constantly shown on the display as a four-section bar graph |
| Battery Life | 5000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries |
| EMC | In accordance with IEC61326 including amendment No.1 |
| Dimensions | 8 x 5.7 x 3.2" (203 x 148 x 78 mm) |
| Weight | 34.57 oz (980 g) |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
