Megger MIT330 Digital Insulation Tester, 1000V

Availability: 8 to 9 Weeks

Megger 1015-713 Offers

Designed with the needs of today’s electrical contractors and using considerable customer research, this tester is outfitted with a durable rubber case and protective cover. In the event of accidental misuse, this tester has a broad set of features developed to protect user safety, including a live circuit warning.

Features

• Extremely easy to use
• Tough rubber armoured case
• Self contained protective cover
• Live circuit warning
• Weatherproof to IP54
• Intelligent safety system for protection
• Result storage and downloading
• Download software included
• USB interface
• Compatible with CertSuite.app

Tough

• Designed to take the bashing that testers receive on site, this insulation tester is rubber armoured
• The rigid display cover folds right out of the way during testing and locks down to protect the display when it is finished

Simple to use

• No buried functions mean it is obvious how to use the tester
• Colour coded ranges help test selection, reducing testing time and help with fault location
• A user guide in the lid provides all the basic information

Hands free use

• It hangs comfortably around the neck for hands-free use because the instrument is carefully balanced
• Continuity and buzzer testing starts automatically on connection to the circuit
• Insulation tests being activated from the instrument or the switch probe
• Backlighting
• Both the display and the range selected can be read in the dark because the tester has a backlit display and range selection

Safety features

To protect the user and the tester from incorrect use, the insulation and continuity tester features an extensive range of features. including:

• Safety Interlock – prevents unsafe connection of test leads
• Safe contact detectors – Even if the tester is connected to a live circuit whilst on continuity setting the tester will remain safe and not be damaged
• Live voltage warning – alerts the operator when a circuit voltage over 25 V exists
• Safety lockout – Prevents the test from operating when the circuit voltage is >50 V
• Continuity check – prevents a continuity test or buzzer test on a live circuit.
• Meets or exceeds the UK and International Wiring Regulations, including requirements of BS7671 and VDE 0413 parts 1 and 4, HD 384, IEC 364, NFC15-100, NEN3140, ES59009 and EN 61557

Applications

• Domestic, commercial and industrial electrical contracting
• Building maintenance, testing, inspection and servicing
• Fixed wiring installation
• Panel building
• Testing of motors, generators, switchgears and power tools
• Street lighting and low volume manufacturing environments

Megger 1015-713 Specifications

Specifications

Insulation	Nominal test voltage: 1000, 500, 250 V (DC)
Measuring Range	10 kΩ to 999 MΩ on all rangesShort circuit current: 1.5 mA nominalTest current on load: 1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364)Accuracy at 68°F (20°C): ±3%, ±2 digits up to 10 MΩ, ±5% up to 100 MΩ, ±30% up to full scale
Continuity	Measuring range: 0.01 to 99.9 Ω (0 to 50 Ω on) analogue scale)Open circuit voltage: 5 V ±1 VShort circuit current: 205 mA +10 mA –5 mAAccuracy at 68°F (20°C): ±3% ±2 digitsMeasuring range: 0 to 2/20/200/2 kΩOpen circuit voltage: 1.5 V ±0.5 VZero offset adjust: 0 to 9 Ω
Resistance	Measuring range: 10 Ω to 1 MΩOpen circuit voltage: 5 VShort circuit current: 1.5 mAAccuracy at 68°F(20°C): ±5% ±2 digits up to 100 kΩ
Voltage	Measuring range: 0 to 600 V AC (50/60 Hz) or DCAccuracy at 68°F (20°C): DC or AC (50/60 Hz): ±1%, ±2 digitsTemperature coefficient: <0.1% per °C on all ranges
Continuity Buzzer	Adjustable at 1 to 20 ΩResponse time <20 ms
Default Voltmeter	>25 V AC or DC is applied display will operate as a voltmeter
AutoPower Down	Operates after 10 minutes if left in standby mode
Temperature and Humidity	Operating range: 14 to 140°F (-10 to 60°C)Operating humidity: 93% RH at 104°F (40°C) maximumStorage range: -13 to 158°F (-25 to 70°C)
Test Result Storage (1000 results)	Job number: 255 locationsDistribution board no: 99 locationsCircuits: 99 locationsPhases: P1, P2, P3
Communications	USB interface
Environmental Protection	IP54
Fuses	Terminals: 500 mA (F) 600 V, 1.25 x 0.23" (32 x 6 mm) Ceramic HBC 10 kA minimum
Safety	Meets the requirements of IEC61010-1 Cat III 600 V phase to earth
Automatic Discharge	After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored
Power Supply	Type: 8 x 1.5 V cells IEC LR6 type (AA alkaline)Battery life: 1000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries
E.M.C.	In accordance with IEC61326-1
Dimensions	8 x 5.7 x 3.2" (203 x 148 x 78 mm)
Weight	34.56 oz (980 g)

What's included with the Megger 1015-713

• Insulation and Continuity Tester
• Calibration Certificate
• Certificate of Test
• Red/Black Test Lead Set with Clips
• USB Lead
• SP4F Switched Probe
• 8 x AA (LR6) Batteries (Installed)
• User Manual (CD)
• Printed Quick Start Guide
• Warranty Card
• Three-Year Warranty

Megger MIT330 Digital Insulation Tester, 1000V. Get Free Shipping when you order today on EquipTestPro.com.