Megger MIT410/2 Insulation Continuity Tester, PI, DAR, 50V/100V/250V/500V/1000V
SKU: 1004-735
Availability: 5 Days2 in Stock Megger MIT410/2 Offers MIT410/2 – 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization Index, Dielectric Absorption Ratio. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are requi
Availability: 5 Days2 in Stock
Megger MIT410/2 Offers
MIT410/2 - 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization Index, Dielectric Absorption Ratio.
Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.
A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.
Continuity testing is how significantly faster, and a single auto-ranging 0.01 megohm to 1.0 megohm function replaces the "ohms" and "kOhms" ranges. Retained are the 200 mA and 20 mA test options.
Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.
Features
- Insulation testing up to 1000 V and 200 GΩ range
- Stabilized insulation test voltage (New)
- Single range, faster continuity testing from 0.01 ohm to 1 megohm (New)
- 600V Trms AC and DC voltage measurement
- Live circuit detection and protection
- User variable insulation test voltage from 100V to 1000V (New) depending on model
- Test result storage and Bluetooth downloading depending on model
- CAT IV 600 & IP54
Insulation Resistance Testing
The stabilized insulation test voltage is now accurate to +2% -0%. This compares to the industry standard +20%, providing a more accurate test voltage without the risk of over-voltage damage to circuits or components. The output voltage is maintained between 0 and 2% throughout the test range.
Where a non-standard test voltage is required, a variable range allows the exact test voltage to be selected from 10 V up to 1000 V. Subject to the same stabilized output control.
Applications
- Commercial Avionics
- Military land, Marine and Air communications
- Manufacturing/Production line goods
- Electrostatic measurement
- Component testing
- Battery powered traction and lifting equipment
Megger MIT410/2 Specifications
| Insulation test voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Guard terminal performance | <5% error at 500 kΩ |
| Temperature co-efficient | < 0,1% per °C up to 1 GΩ, < 0,1% per °C per GΩ above 1 GΩ |
| Resolution | 0.1 kΩ |
| Short circuit/charge current | 2 mA +0% -50% to EN 61557-2 (2007) |
| Open circuit voltage | -0% +2% ± 2V |
| Test current | 1 mA at min. pass value of insulation to a maximum of 2 mA max. |
| Leakage | 10% ±3 digits |
| Voltage | 3% ±3 digits ±0.5% of rated voltage |
| Timer control | 60 second countdown timer |
| Continuity measurement | 0.01 Ω to 999 kΩ (0 to 1000 kΩ on analog scale) |
| Open circuit voltage | 5 V ± 1 V |
| Test Current | 200 mA (–0 mA +20 mA) (0.01 Ω to 4 Ω) |
| Polarity | Single polarity (Default) / Dual polarity (configurable on setup). |
| Lead resistance | Null up to 9.00 Ω |
| Voltage range | AC: 10 mV to 600 V TRMS sinusoidal (15 Hz to 400 Hz) DC: 0 to 600 V |
| Frequency measurement range | 15 Hz - 400 Hz |
| Frequency measurement | ±0.5% ± 1digit (100 Hz to 400 Hz) |
| Capacitance measurement | 100 pF to 10 μF |
| Storage capacity | >1000 test results |
| Battery life | 3000 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ Charger (Optional): 12-15 V dc (accessory interface) |
| Dimensions | Instrument 228 mm x 108 mm x 63 mm (9.00 in x 4.25 in x 2.32 in) |
| Weight | 600 g (MIT400/2), (28.74 oz) |
Click here for complete specifications on the Megger MIT410/2
