Megger MIT515/2 Insulation Resistance Tester, Essential, 5 kV
SKU: 1016-081
Availability: 1 in Stock Megger MIT515/2 Offers Instrument productivity and accuracy are the focus of the MIT Series. An intuitive user interface ensures no lost time remembering how to use the tester. Simplicity of operation is achieved with two rotary switches and a large backlight display, which enables multiple measurement information to be displayed simultaneously. A graphical quick start guide is provided inside the lid of each model t
Availability: 1 in Stock
Megger MIT515/2 Offers
Instrument productivity and accuracy are the focus of the MIT Series. An intuitive user interface ensures no lost time remembering how to use the tester. Simplicity of operation is achieved with two rotary switches and a large backlight display, which enables multiple measurement information to be displayed simultaneously. A graphical quick start guide is provided inside the lid of each model to assist first-time users and has QR code links to the online User Guide. The Essential models provide an excellent ±5% accuracy all the way up to 1 TΩ at 5000 V or 2 TΩ at 10,000 V.
One common feature across the whole range is the Megger "no compromise" approach to safety. The Megger level of safety will always go further than simply complying with the relevant safety standards. All Essential models are safety rated to CAT IV 600 V up to 9842' (3000 m) altitude. The whole range features a dual case design with a tough outer case to protect the tester from knocks and drops, and a fire-retardant inner case. The case IP rating prevents moisture and dust ingress when storing or carrying the instrument. Case lids are removable for improved access to the terminals. A multitude of voltage warnings also help to ensure user safety.
Features
- RE>Act mode not only measures reabsorption current but also provides an indication to the user of the impact it will have on measurement range and accuracy
- RE>Act removes the possibility to pass insulation that should have been failed, and it can also be used to monitor discharge following a test
- Preconfigured diagnostic tests include:
- Polarisation Index (PI)
- Dielectric Absorption Ratio (DAR)
- PI predictor function (PIp) uses the first part of the IR curve to predict the rest at 5 minutes into the test
- Preset voltage ranges are provided in insulation test mode
- Measures up to 10 TΩ
- Up to 3 mA noise rejection
- Negative current handling
- Hazardous peak voltage detection during IR measurement
- Safety rated up to CAT IV 1000 V to 9842' (3000 m)
- Hazardous peak voltage detection during IR measurement
- Intuitive colour custom display
- Unique dual-case design for additional user protection
- Double insulated test leads with clamps rated at 3 kV and non-detachable test clips
- Operates from battery or AC mains supply
- Rapid charge Li-ion battery
- Auto power off and 30 minutes quick charge
Applications
- During manufacture, as part of quality inspection or safety checking prior to shipment
- Before product/asset shipment to provide benchmark measurements
- On site inspection, comparing to benchmark results, to ensure everything is good before installation
- Checking after installation of a new asset
- During maintenance to drive predictive maintenance
- Following repair prior to powering up
Megger MIT515/2 Specifications
| Test Voltages | 250 V, 500 V, 1000 V, 2500 V, 5000 V, or User-defined |
| Test Voltage Accuracy | +4%, -0%, ±10 V nominal at 1 GΩ load 32 to 86°F (0 to 30°C) |
| Resistance Range | 10 kΩ to 15 TΩ at 5 kV |
| Resistance Accuracy | ±5%: 1 TΩ at 5000 V, 500 GΩ at 2500 V, 200 GΩ at 1000 V, 100 GΩ at 500 V, 50 GΩ at 250 V ±20%: 10 TΩ at 5000 V, 5 TΩ at 2500 V, 2 TΩ at 1000 V, 1 TΩ at 500 V, 500 GΩ at 250 V |
| Capacitance Range | 10 nF to 25 μF |
| Capacitance Accuracy | ±10% ±5 nF |
| Current Range | 0.01 nA to 6 mA |
| Current Accuracy | ±5% ±0.2 nA at all voltages |
| Interference Rejection | 3 mA from 450 V to 5 kV |
| Voltmeter Range | 30 V to 660 V AC/DC, 45 Hz to 65 Hz |
| Voltmeter Accuracy | ±3% ±3 V |
| Guard Terminal Performance | Guards out current IG ≥5000× IL at 100 GΩ / 5000 V with maximum error of 1% |
| Analogue Display Range | 100 kΩ to 10 TΩ |
| Digital Display Range | 10 kΩ to 10 TΩ |
| Short Circuit / Charge Current | 3 mA at 5 kV |
| Insulation Test Alarm | 100 kΩ to 10 GΩ |
| Capacitor Charge Time | <3 s/μF at 3 mA to 5 kV |
| Capacitor Discharge Time | <250 ms/μF to discharge from 5 kV to 50 V |
| Auto-Ranging AC Voltage | 90 to 264 V rms 47 to 63 Hz 100 VA |
| Battery Charge Time | 2.5 hours (deep discharge) 2 hours (normal discharge) |
| Battery Voltage | 10.8 V, 5.2 Ah Li-ion Meets IEC 62133:2003 |
| Battery Life | 6 hours (typical) continuous testing at 5 kV with a 100 MΩ load |
| Timer Range | Up to 99 minutes 59 seconds (15 seconds minimum setting) |
| Test Modes | IR, IR(t), DAR, PI |
| Ambient Conditions | -4 to 122°F (-20 to 50°C) 90% RH non-condensing at 104°F (40°C) |
| IP Rating | IP65 (lid closed) IP40 (lid open) |
| Safety Rating | CAT IV 600 V to 9842' (3000 m) altitude |
| Dimensions | 12 × 11.2 × 7.1" (315 × 285 × 181 mm) |
Click here for complete specifications on the Megger MIT515/2
