Mitutoyo 543-352B-10 Series 543 ABSOLUTE Digimatic ID-C Indicator with signal output function, 0 to 0.5"/0 to 12.7 mm, inch/metric
SKU: 543-352B-10
Availability: 1 Week Mitutoyo 543-352B-10 Offers Features Uses a green/red LED and Go/No-Go output to quickly show if measurements are within tolerance Measurements are shown on a large, easy-to-read LCD display A maximum/minimum value holding function performs Go/No-Go judgments against the peak values set The judgment is performed by calculating the measurement data obtained instead of through a mechanical or electrical contact which p
Availability: 1 Week
Mitutoyo 543-352B-10 Offers
Features
- Uses a green/red LED and Go/No-Go output to quickly show if measurements are within tolerance
- Measurements are shown on a large, easy-to-read LCD display
- A maximum/minimum value holding function performs Go/No-Go judgments against the peak values set
- The judgment is performed by calculating the measurement data obtained instead of through a mechanical or electrical contact which provides better reliability
- The judgment is indicated by green and red LEDs and "<, O, >" signs on the LCD allowing the signal to be outputted to an external device such as a sequencer through the NPN open-collector
- The high-speed detector measures 100 times per second
- Signal can be outputted to an external device
- Analog bar provides easy-to-read values when scanning for maximum, minimum, and TIR values
- Go/No-Go judgments are performed by setting the upper and lower tolerances
- ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
- Origin reset is not required even when data is re-displayed after disappearance due to insufficient illumination during use
- SPC output function allows for quick and easy data management in real-time
- Functions include data output, remote control, origin set, zero-set, Go/No-Go judgment, analog bar, fast measuring frequency, peak detection, calculation, counting direction switching, power on/off, data output, and inch/mm conversion
- Alarm: Low voltage, counting value composition error, over-flow error, and tolerance limit setting error
- Unlimited response speed eliminates over-speed errors
- IP54 for protection resists dust and contaminants from machine shop environments
- Manufactured to meet ANSI/AGD standards
Applications
- Aerospace
- Automotive
- Defense
- Electronics
- Energy
- General manufacturing
- Plastics and rubber
Mitutoyo 543-352B-10 Specifications
Specifications
| Range | 0 to 0.5"/0 to 12.7 mm |
| Accuracy | ±0.0001"/±0.003 mm |
| Resolution | 0.0001, 0.0005, 0.00005"/0.001, 0.01 mm |
| Measuring Force | 2.5 N or less |
| Maximum Response Speed | Unlimited |
| Selectable Resolution | Yes |
| SPC Output | Yes |
| Units | Inch/metric |
| Display | LCD |
| Length Standard | ABSOLUTE electrostatic capacitance type linear encoder |
| IP Rating | IP54 |
| Power Supply | 5 to 24 V DC |
| Thread Type | 4-48 UNF |
| Back Type | Flat back |
| Stem Diameter | 0.375" (9.53 mm) |
What's included with the Mitutoyo 543-352B-10
- Digimatic Indicator
- Fitted Plastic Carrying Case
Mitutoyo 543-352B-10 Series 543 ABSOLUTE Digimatic ID-C Indicator with signal output function, 0 to 0.5"/0 to 12.7 mm, inch/metric. Great savings PLUS Free Shipping when you order online at EquipTestPro.com.
Related Products
