US Dollar
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Make system integration simple with this panel mount design display that supports odd fluted parts, segment, and edge detection. In addition, this display provides readouts for two measurement values simultaneously.
Features
Preset/offset
Sets the currently displayed measurement value to zero or a specified numeric value. This is useful, for example, if a difference in the diameters of a reference gauge and a workpiece is to be allowed for in calibration, or if a dimension of a workpiece that exceeds the measurement range of the LSM is to be measured.
Mastering
For continuous processing of high-precision workpieces, fine-adjusting the preset or offset value is called mastering. By specifying a mastering value, the total correction will be (zero-set/offset value) + (±mastering value). If a positive mastering value is specified, the displayed value for a workpiece diameter measurement will be greater than the actual value. If a negative value is specified, the displayed value will be smaller than the actual value.
Sample measurement
On a sample measurement, the number of measurements will be defined (in the range of 2 to 999) in advance. From this sample, measurement various calculation results (mean, maximum, minimum, and range) can be derived. These measurements can be used for runout measurements on a revolving workpiece and simplified cylindricity measurements.
Arithmetical average/moving average
Arithmetical/moving average modes are provided to obtain the average of measurement values. On this type of LSM, either of them can be specified before starting measurement. In the arithmetical average mode, the number of scans over which to take an averaging can be set at one of twelve steps between 1 (0.32 ms) and 2048 (0.64 seconds). In the moving average mode, the number of scans can be set at one of seven steps between 32 (0.01 seconds) and 2048 (0.64 seconds), and the measurement value will be updated every sixteen scans on and after the second measurement, irrespective of the specified number of scans for averaging. The latter mode is suitable for judging the trend in the diameter or width of an endless workpiece, such as wire or tape from a measurement that requires a long period.
Automatic measurement using edges
The edges created by scanning a workpiece can be used to program an LSM. A maximum of 127 workpiece features, and 127 of the spaces between these features, can be used, which involves a total of 255 edges. This is most useful for measuring such things as IC chip leads or connector pins that are approximately equally spaced. This method cannot be applied to transparent objects.
Abnormal data elimination
If a piece of data significantly exceeds the tolerance limit because the workpiece or measuring unit is contaminated by a water droplet, oil droplet or dust, the piece of data will be automatically removed by this function.
Simultaneous (dual-program) measurement
It is possible to measure two items simultaneously with one laser scan micrometer unit, and to output the data. This function can be used to simultaneously measure the outside diameter and runout of a bar that is rotating, or to measure the outside diameters of two cylinders or wires at the same time.
Applications
| Display | 9-digit LED (for measurement) and 8-digit LED (sub-display) |
| Designation | Segments: Segment 1 to 7 (Segment 1 to 3 for transparent objects) Edge: 1 to 255 edges can be detected |
| Averaging Times | Arithmetical average: Per 1 to 2048 Moving average: Per 32 to 2048 |
| Go/No-Go Judgment | Nominal value ±tolerance setting, upper and lower limits setting, multi-limit setting |
| Measurement Mode | Waiting, single measurement, continuous measurement |
| Statistical Calculation | Available when connecting an external PC via the RS-232C or USB interfaces |
| Data Output | USB2.0, RS-232C and I/O-analog interfaces |
| Operating | Temperature: 32 to 113°F (0 to 45°C) Humidity: 35 to 85% RH (with no condensation) |
| Power Supply | 24 V DC ±10%, 1.3 A (sold seperately) |
| Dimensions | 8.57 x 5.67 x 2.83" (217.6 x 144 x 72 mm) |
| Weight | 3.08 lbs (1.4 kg) |
| Display | 9-digit LED (for measurement) and 8-digit LED (sub-display) |
| Designation | Segments: Segment 1 to 7 (Segment 1 to 3 for transparent objects) Edge: 1 to 255 edges can be detected |
| Averaging Times | Arithmetical average: Per 1 to 2048 Moving average: Per 32 to 2048 |
| Go/No-Go Judgment | Nominal value ±tolerance setting, upper and lower limits setting, multi-limit setting |
| Measurement Mode | Waiting, single measurement, continuous measurement |
| Statistical Calculation | Available when connecting an external PC via the RS-232C or USB interfaces |
| Data Output | USB2.0, RS-232C and I/O-analog interfaces |
| Operating | Temperature: 32 to 113°F (0 to 45°C) Humidity: 35 to 85% RH (with no condensation) |
| Power Supply | 24 V DC ±10%, 1.3 A (sold seperately) |
| Dimensions | 8.57 x 5.67 x 2.83" (217.6 x 144 x 72 mm) |
| Weight | 3.08 lbs (1.4 kg) |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
