Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Combines ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation. The unit is powered from either its rechargeable battery or line power making it suitable for continuous testing in production line/repetitive use environments. Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance.
The DLRO10HD provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 m? and 1 A into measurements up to 2.5 ?. The duration of each test may be up to 60 seconds. It is rated CAT III 300 V. A range of test leads is available to suit the application. The DLRO10HD provides five test modes each of which is selected through a simple rotary control.
Test Modes
Automatic unidirectional mode applies current in one direction only to speed up the measurement process. However thermal EMF resulting from dissimilar metal bonds can cause lower accuracy. Test starts automatically when probes are connected.
Continuous mode allows repeated measurements to be made on the same sample. Simply connect the test leads and press the test button. The measurement is updated every three seconds until the circuit is broken.
Inductive mode is selected when measuring resistance on, for example, motors and generators. When measuring inductive loads it is necessary to wait for the voltage to stabilize as the inductive element is charged. Test leads are firmly connected to the device under test and the 'Test' button pressed. The instrument will pass the selected current through the sample continuously in one direction only and take repetitive readings that will gradually decrease to the true value as the voltage stabilizes. The operator decides when the result is stable and presses the 'Test' button to terminate the test.
Applications
The DLRO10HD measures low resistance values in applications ranging from railways and aircraft to resistance of components in industry.
Any metallic joint can be measured but users must be aware of measurement limitations depending on application. For example, if a cable manufacturer plans to make resistive measurements on a thin wire, a low test current should be selected to prevent heating the wire thereby changing its resistance.
Measurements on electric motors and generators will be inductive and require the user to understand the inductive mode and charging process before a correct result is achieved.
The DLRO10HD is well suited to measuring thick conductors, bonds and quality of welding because of its 10 A range for resistance values up to 250 m?.
Electromagnetic noise induced into the leads can interfere with a reading. A noise symbol alerts the user and prevents a measurement when the instrument detects noise above its threshold.
When dissimilar metals are joined a thermocouple effect is created. Users should select a bidirectional mode to ensure cancellation of this effect. The instrument measures with current flowing in both directions and averages the result.
Normal mode is initiated by pressing the 'Test' button after connecting the test leads to the unit under test. Continuity of all four connections is checked. Current is applied in both forward and reverse direction following which measurement is displayed.
Automatic mode is started as soon as the probes make contact. Forward and reverse current measurements are made and the average value is displayed. This mode is ideal when working with the supplied DH4 handspikes. Each time the probes are removed and reconnected to the load a new test will be performed without the need to press the test button.
REED R8500 9mm Video Inspection Camera, Recordable
9mm camera diameter and 2.5" color TFT LCD monitor. Saves high resolution images and records video.
Features
REED R2300 Infrared Thermometer
This infrared thermometer features a 12:1 distance to spot ratio and is capable of measuring temperatures up to 752°F (400°C). The R2300 is an affordable non-contact measurement solution able to quickly and efficiently measure the temperature of hot, hazardous or hard-to reach objects from a safe distance.
Features
REED R9999 Industrial Tool Bag
Black and blue polyester bag with a reinforced bottom, padded shoulder strap, double zipper and mesh pockets. Outside Dimensions (LxWxH): 15.8 x 7.8 x 11.8" (400 x 200 x 300mm).
| DLRO10 | DLRO10HD | DLR010X | |
| Power Limited Ouput Test Ranges (<0.25 W) | X | X | X |
| High Power Output Test Ranges (25W) | X | ||
| Auto Current Reversal | X | X | X |
| Auto Start (Continuity Detection) | X | X | X |
| High Input Protection < 600V | X | X | X |
| Noise Limit Exceeded Indicator | X | X | X |
| User Interchangeable Detachable Battery | X | X | |
| Hang from neck operation | X | X | |
| Operate From Mains/Line Supply | X | ||
| IP65 Lid Closed | X | ||
| IP54 in Use | X | ||
| Ultra Tough Case | X | ||
| Test Result Storage with Memos | X | ||
| Printer and PC Output | X | ||
| User Selectable Test Limits | X |
| DLRO10 | DLRO10HD | DLR010X | |
| Power Limited Ouput Test Ranges (<0.25 W) | X | X | X |
| High Power Output Test Ranges (25W) | X | ||
| Auto Current Reversal | X | X | X |
| Auto Start (Continuity Detection) | X | X | X |
| High Input Protection < 600V | X | X | X |
| Noise Limit Exceeded Indicator | X | X | X |
| User Interchangeable Detachable Battery | X | X | |
| Hang from neck operation | X | X | |
| Operate From Mains/Line Supply | X | ||
| IP65 Lid Closed | X | ||
| IP54 in Use | X | ||
| Ultra Tough Case | X | ||
| Test Result Storage with Memos | X | ||
| Printer and PC Output | X | ||
| User Selectable Test Limits | X |
| DLRO10 | DLRO10HD | DLR010X | |
| Power Limited Ouput Test Ranges (<0.25 W) | X | X | X |
| High Power Output Test Ranges (25W) | X | ||
| Auto Current Reversal | X | X | X |
| Auto Start (Continuity Detection) | X | X | X |
| High Input Protection < 600V | X | X | X |
| Noise Limit Exceeded Indicator | X | X | X |
| User Interchangeable Detachable Battery | X | X | |
| Hang from neck operation | X | X | |
| Operate From Mains/Line Supply | X | ||
| IP65 Lid Closed | X | ||
| IP54 in Use | X | ||
| Ultra Tough Case | X | ||
| Test Result Storage with Memos | X | ||
| Printer and PC Output | X | ||
| User Selectable Test Limits | X |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
