Canadian Dollars
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Capable of checking mode 2 and single-phase mode 3 (level 1 and two-phase level 2) chargers, this EV charger checker can perform four EV charger safety and operation checks. In addition, this checker increases ground/earth leakage current until the protective device trips to ensure it trips at the correct leakage current level. If the leakage current that trips the device is too low, it will indicate there is an issue with the device or that there is already a high level of leakage present.
Features
Four important safety checks
Nuisance charger supply tripping check
This test will help determine whether the EV charger user is likely to experience nuisance tripping of the RCD or GFCI. This charger checker slowly increases ground/earth leakage current until the protective device trips to ensure it trips at the correct leakage current level. If the leakage current that trips the device is too low it will indicate either an issue with the device or there is already a high level of leakage present.
Four key EV charger operation checks
Applications
| EVSE | Standard: IEC 61851-1:2017Supply options (set in settings):1. 230 V single-phase2. 120 V single-phase3. 208 V two-phase4. 240 V two-phase |
| Supply Measurement | Voltage:Range: 5 to 300 VResolution: 1 VAccuracy: ±5% ±2 digitsMeasurement: L to N, L to PE and N to PEReverse polarity indication: L to N, for single-phase option onlyFrequency:Range: 45 to 65 HzResolution: 1 HzAccuracy: ±1 digit |
| EVSE Interface (EV Charger Function) Tests | 1. Proximity detection (PP) states:Read onlyNo proximityProximity detected, unlatchedProximity detected, latched2. Control pilot (CP):Set and read states: State A (disconnected), State B (connected), State C (charging), State D (charging without ventilation), State E (CP short to PE)Read only state: State F - EVSE charger fault conditionMaximum voltage: ±14 VFrequency: 940 to 1040 HzDuty cycle: 8 to 97%Maximum charging current indication according to IEC 61851-1:2017, tables A.7 and A.8 |
| Resistance of Earth Protective Conductor (RPE) | Test current: 200 mARange: 0 to 10 ΩResolution: 0.01 ΩAccuracy: ±5% ±2 digits |
| RCD/GFCI Tests | Trip time accuracy: ±1% ±1 msTrip current accuracy: ±3% (apply to all RCD/GFCI tests) |
| Personal Protection Tests - 230 V Single-Phase | 1. RCD 30 mA AC test:Current: 31.5 mA AC (5% above nominal trip current)Accuracy: ±1.0 mAMaximum test time: 300 msPolarity selection: 0 and 180° of an input sine wave2. RCD 6 mA DC test:Ramp: Up at rate of 6 mA in 2.5 seconds, then held at 6 mA DCAccuracy: ±0.5 mARamp polarity: Positive and negative rampMaximum test time: 12.5 secondsPolarity selection: 0 and 180° of an input sine wave |
| Personal Protection Tests - 120 V Single-Phase/240 V Two-Phase | 1. GFCI/CCID 5 mA AC test:Current: 6 mA ACAccuracy: ±0.5 mAMaximum test time: 5.59 secondsPolarity selection: 0 and 180° of an input sine wave2. GFCI/CCID 20 mA AC test:Current: 21 mA AC (5% above nominal trip current)Accuracy: ±0.5 mAMaximum test time: 5.59 secondsPolarity selection: 0 and 180° of an input sine wave |
| Nuisance Tripping Tests - 230 V Single-Phase | 1. RCD AC Ramp test:Current: AC current ramp up to 30 mA in 2 mA stepsAccuracy: ±0.5 mAStep time: 300 msMaximum test time: 4.5 seconds2. RCD DC Ramp test:Test current ramp up at rate of 6 mA in 2.5 seconds, then held at 3 mA DCMaximum test time: 11.25 seconds |
| Nuisance Tripping Tests - 120 V Single-Phase/240 V Two-Phase | 1. GFCI/CCID 5 mA AC test:Current: AC current ramp up to 6 mA in 0.5 mA stepsAccuracy: ±0.5 mAStep time: 100 msMaximum test time: 1.2 seconds2. GFCI/CCID 20 mA AC test:Current: AC current ramp up to 20 mA in 1 mA stepsAccuracy: ±0.5 mAStep time: 100 msMaximum test time: 2 seconds |
| Touch Tests | Voltage: Test current typically ⅓ of RCD nominal test currentContact pad: Dangerous voltage indication at PE conductor |
| Connections | Main test: Type 2 maleRPE test return: 0.157" (4 mm) shrouded socket on base of handle |
| Languages | English, French, German and Spanish |
| Environment Conditions | Temperature:Operating: 32 to 104°F (0 to 40°C)Storage: 14 to 158°F (-10 to 70°C)Operating humidity: 90% RH at 104°F (40°C) maximumMaximum altitude: 6561.68' (2000 m)Dust and moisture ingress: IP40 to IEC60529 in use |
| Safety | Standards: IEC 61010-1:2010EVSE standard: IEC 61851-1:2017Category: CAT II 300 V |
| Power Supply | 4 x AA cells |
| Dimensions | 9.45 x 3.38 x 7.09" (24 x 8.6 x 18 cm) |
| Weight | 1.28 lbs (583 g) without batteries |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
| Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
